Skip to main content
John Deere 75D, 135D, 225DLC Upper Cab Windshield Glass | Depco

John Deere 75D, 135D, 225DLC Upper Cab Windshield Glass | Depco

Sold by eSkidSteer

Sponsored
$410.99

Price and availability requested live for this page. Final details are set by the seller.

Opens eskidsteer.com in a new tab. The seller handles checkout, shipping, and returns.

StorkScout may earn money from Shopify when you buy through product links. Sponsored results are labeled, and compensation never determines the Weekly Edit. How we make money

Share

A closer fit

Find this, but…

Start with this listing, then change what matters. Matches come live from independent Shopify shops and are separate from StorkScout’s Weekly Edit.

Searches start with new, available products that ship to and from the U.S.

What would suit you better?

Try “folds for air travel” or “same shape, without plastic.”

About this product

🔎OEM interchange
📦Crated

📘 Overview

John deere windshield replacement — upper Windshield — the John Deere replacement for OEM 4664382, cut to 41" X 33". It covers 3 published John Deere models, listed in full further down this page. The pane installs into the original cab frame using the factory glazing seal and retaining hardware, so no cab modification is required. Sold as a john deere windshield replacement and listed as a john deere windshield replacement, it is matched to the OEM number rather than offered as a universal fit.

⚙ Key Features of the John Deere 75D Upper Windshield

  • Cut to the OEM 4664382 pattern at 41" X 33" — drops into the existing aperture with no trimming
  • Direct interchange with OEM 4664382 — same mounting points and same fit as the original John Deere part
  • One part number across 3 models spanning John Deere excavators — one spare covers a mixed fleet
  • Packed for large suspension — the shipping method Depco specifies for this part
  • A true excavator upper windshield — the john deere upper windshield is dimensioned from the original John Deere part, not adapted from a similar one

🔑 Why Fit the OEM 4664382 Upper Windshield Replacement

  • Restores the original sightline — cracked cab glass is a visibility and pre-start inspection failure, not a cosmetic problem
  • Aftermarket pricing against a dealer pane with the identical cut and the identical mounting method
  • Ordering a john deere excavator by OEM number removes the guesswork — the upper windshield replacement fitment on this page is published, not inferred

📊 John deere windshield replacement Specifications — OEM 4664382

Specification Value OEM part number 4664382 Depco part number D4664382 Part type Upper Windshield Dimensions 41" X 33" Machine class Excavator Models covered 3 Installation Original cab frame, factory glazing seal Shipping method Large Suspension

🚜 Which John Deere Models Take the OEM 4664382 Upper Windshield?

This is a machine-specific replacement part matched to OEM 4664382, not a universal fit. Fitment follows the published model list below:

Machine group Models John Deere excavators 75D, 135D, 225DLC

Look for your model in the table above and confirm the serial-number range before you order. If your model is not listed, email support@eskidsteer.com or message us on chat with the machine model and serial number. Everything needed to confirm fitment is on this page — add it to your cart to check delivered pricing for your address.

🔗 Parts Often Bought With the 4664382 Upper Windshield

John Deere owners replacing this upper windshield commonly need one of these as well, all held in stock:

Part OEM number Why it is listed here John Deere/Hitachi Lower Windshield OEM 4664383 the same part for other models John Deere Wheel Loader Front Windshield OEM T230096 the same part for other models

Inspect on arrival, not afterwards: unwrap enough to see the pane while the driver waits, and record any damage on the receipt before signing. A clean Bill of Lading ends any claim against the carrier.

❓ OEM 4664382 Upper Windshield Questions, Answered

Is this an exact replacement for John Deere OEM 4664382?

Yes. The Depco D4664382 is a direct interchange for OEM 4664382 and fits the original mounting position without modification.

What size is the John Deere Excavator Upper Windshield?

The upper windshield measures 41" X 33". Measure your existing part before ordering if it has been replaced previously.

Will the 4664382 part fit a 75D and a 225DLC?

Yes. Both the 75D and the 225DLC are on the published fitment list for OEM 4664382, along with 1 other models shown in the compatibility table on this page.

Do I need new seals to fit the 4664382 glass?

No. The upper windshield installs into the original cab frame using the factory seal and retaining hardware. Replace the glazing strip only if it is perished or torn.

How does the John Deere Upper Windshield ship?

Delivery is by LTL truck freight. Enter your address at checkout to see the shipping charge, and add lift gate service there if the delivery point is residential.

Description supplied by eSkidSteer through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.

Keep exploring

Related current listings to open on StorkScout and compare before visiting a seller.

Current listing
$410.99
Shop at eSkidSteer