About this product
- Genuine Honda Product
- Direct Factory Replacement Part
- Fitments for K20, K24, and V6 Transmissions
- Perfect Addition to Any Clutch Replacement
-
Honda J/K Series Clutch Release Bearing
This is the genuine Honda clutch release bearing (also called a throwout bearing) for a wide range of K-series and J-series V6 Honda and Acura manual transmissions. It's the part the release fork pushes on when you press the clutch pedal, riding against the pressure plate fingers to disengage the clutch so you can shift. It's a small part doing a constant job, and when it wears out you hear it, so putting a genuine Honda bearing back is how you get quiet, consistent clutch feel again.
Two Part Numbers, Pick The Right One
This bearing is offered under two part numbers that cover different applications, so match yours to your car before ordering:
- 22810-PPT-003 covers the fitments in list A below.
- 22810-57A-006 covers the fitments in list B below, and supersedes the older 22810-RPN-003 (same part, current production number).
If you've been looking for 22810-RPN-003, 22810-57A-006 is its replacement. Check your application against the two lists so you order the correct bearing.
When To Replace It
A worn release bearing usually tells you with noise, a whirring or growling that shows up when the clutch pedal is involved, often changing as you press or release the pedal. The best time to replace it is any time the transmission is already out for a clutch job, because the labor to reach it is the expensive part. Reusing a tired bearing alongside a fresh clutch is how you end up pulling the trans a second time, so replace it as part of the service.
Why Genuine Honda
This is a factory Honda part, built to the original fit and spec. The bearing reduces friction between the release fork and the pressure plate and runs true, which is what keeps pedal feel smooth and engagement consistent without the noise and vibration a worn or low-quality bearing introduces. On a part buried inside the transmission, factory reliability is worth it.
Fitment A (22810-PPT-003)
- 2003 Acura CL-S
- 2024-2026 Acura Integra Type S
- 2002-2006 Acura RSX
- 2004-2014 Acura TL
- 2004-2008 Acura TSX
- 2002-2007 Honda Civic Si
- 2017-2021 Honda Civic Type R
- 2023-2026 Honda Civic Type R
- 2002-2006 Honda CR-V
- 2003-2008 Honda Element
- 2003-2020 Honda Accord
Fitment B (22810-57A-006, replaces 22810-RPN-003)
- 2013-2015 Acura ILX
- 2008-2014 Acura TSX
- 2008-2017 Honda Accord (4-cylinder)
- 2008-2015 Honda Civic Si
- 2009-2010 Honda Element
- 2016-2018 Honda HR-V
What You Get
- One genuine Honda clutch release bearing
- Your choice of 22810-PPT-003 or 22810-57A-006 by application
- Factory fit and spec
- 22810-57A-006 supersedes 22810-RPN-003
This is the genuine Honda release bearing for K-series and J-series V6 manuals, offered in the two part numbers that cover the range. Match yours to the fitment lists, and replace it while the transmission is out so you're not back in there over a cheap part.
-
Fitment A (22810-PPT-003)
- 2003 Acura CL-S
- 2024-2026 Acura Integra Type S
- 2002-2006 Acura RSX
- 2004-2014 Acura TL
- 2004-2008 Acura TSX
- 2002-2007 Honda Civic Si
- 2017-2021 Honda Civic Type R
- 2023 and newer Honda Civic Type R
- 2002-2006 Honda CR-V
- 2003-2008 Honda Element
- 2003-2020 Honda Accord
Fitment B (22810-57A-006, replaces 22810-RPN-003)
- 2013-2015 Acura ILX
- 2008-2014 Acura TSX
- 2008-2017 Honda Accord (4-cylinder)
- 2008-2015 Honda Civic Si
- 2009-2010 Honda Element
- 2016-2018 Honda HR-V
-
(1) Clutch Release Bearing
Description supplied by Hybrid Racing through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.
