About this product
APC APCK1024 Pump Repair Kit -- Hayward Super Pump
OEM-equivalent shaft seal, O-rings, and gaskets for the original Hayward Super Pump.
The APC APCK1024 (legacy P/N APCKIT3) is the standard service kit for the Hayward Super Pump (SP1600, SP2600, and related single-speed and two-speed Super Pump models). The seal is the wear part most likely to fail first on this pump line, and catching the leak early with a $20 kit prevents the leak from running down the shaft into the motor bearings.
- Hayward Super Pump SP1600 Series
- Hayward Super Pump SP2600 Series
- Hayward Super Pump 2-Speed variants
- Pumps sharing the Super Pump shaft seal (PS-200 family)
What is the difference between APCK1024 and APCK1024A?
APCK1024 is the standard kit with a Buna-N (NBR) elastomer shaft seal. APCK1024A is the ozone-resistant upgrade using a 3868 Viton (FKM) seal. Choose 1024A if you have any ozone generator on the equipment pad.
Which Super Pump models does this fit?
All single-speed and 2-speed Hayward Super Pump models in the SP1600 and SP2600 families that use the PS-200 shaft seal. Also fits a number of related Hayward pumps sharing the same wet-end design. Match your pump's model number against the SPX parts diagram before ordering.
Can I install this myself?
Yes. Disconnect power at the breaker, unscrew the volute bolts in a star pattern, separate the motor from the wet-end, replace the impeller seal and all O-rings, lubricate with pool-grade silicone, reassemble, and torque the bolts in a star pattern. About 45 minutes for a first-time rebuild.
Description supplied by PST Pool Supplies through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.



