Skip to main content

Hayward Slinger For Motor Shaft | SPX0125F

Sold by Aqua Pool Supply

Sponsored
Hayward Slinger For Motor Shaft | SPX0125F
$6.94

Opens aquapoolsupply.com in a new tab. The seller handles checkout, shipping, and returns.

We may earn a commission when you buy through product links. Sponsored labels identify paid placements from Shopify. We select the Weekly Edit independently. How we make money

Price and availability requested live for this page. Final details are set by the seller.

Share

A closer fit

Find this, but…

Start with this listing, then change what matters. Matches come live from independent Shopify shops and are separate from StorkScout’s Weekly Edit.

Searches start with new, available products that ship to and from the U.S.

What would suit you better?

Try “folds for air travel” or “same shape, without plastic.”

About this product

Hayward SPX0125F Water Slinger for Motor Shaft (Pump Shaft Slinger Washer)

The Hayward SPX0125F is an OEM water slinger (rubber slinger washer) that installs on the motor shaft behind the pump seal plate area on select Hayward pool pumps. Its job is to help deflect water away from the motor bearing area if a seal begins to seep—acting as a protective barrier for the motor.

Fits / Compatibility

  • Commonly used on Hayward Super Pump (SP1600 / SP2600 series) applications
  • Commonly used on Hayward Super II (SP3000 series) applications
  • Commonly used on Hayward MaxFlo (SP1800X / SP2800X series) applications
  • Also referenced as replacing SP0125F and commonly cross-listed as G-71 (aftermarket equivalent)

What It Does

  • Helps prevent water from running down the motor shaft toward the motor bearings
  • Provides added protection if the shaft seal begins to leak
  • Recommended replacement during a seal/repair rebuild when the pump is already disassembled

Dimensions (Quick Reference)

  • Inside Diameter (ID): 9/16"
  • Outside Diameter (OD): 1-11/16"
  • Thickness: 1/8"
  • Material: Rubber

Installation Notes

  • Install on the motor shaft in the correct position for your pump model (typically behind the seal plate area).
  • Inspect the mechanical shaft seal and seal plate surfaces—if the slinger is worn, the seal is often due as well.
  • If you’re rebuilding a pump, replace the slinger along with the seal to help protect the motor long-term.

Related Products

Maintenance Tips

  • If you see water dripping from the pump/motor seam, shut the system down and inspect the shaft seal promptly to prevent motor damage.
  • Keep the pump area dry and check for early signs of seepage—catching a small leak early can save the motor.
  • When replacing a shaft seal, clean mating surfaces carefully and avoid touching seal faces with oily hands.

Description supplied by Aqua Pool Supply through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.

Keep exploring

Related current listings to open on StorkScout and compare before visiting a seller.