GLT Field-Adjustable Slim Wall Pack — 80W — 3000K/4000K/5000K — Dark Bronze

GLT Field-Adjustable Slim LED Wall Pack — 80/64/48/32W Selectable — 3000K/4000K/5000K — Dark Bronze

The GLT SLIM-80FA-UV-CCT (MWP10 Medium series) is a commercial field-adjustable cutoff wall pack and architectural slim LED wall pack engineered to deliver 4,600 to 11,400 lumens (up to 11,400 lumens at up to 151 lm/W) across four selectable power settings—80W (100%), 64W (80%), 48W (60%), and 32W (40%)—and switchable 3000K, 4000K, and 5000K color temperatures. Operating on universal 120-277V electrical systems with 0-10V dimming from 10% to 100%, it is DLC Premium qualified across all lumen packages for commercial utility rebates. Built with a rugged cast-aluminum housing in a bronze polyester powder-coat finish and UL/cUL wet-location listing, this multi-mount exterior luminaire features a slim 5.09" wall projection depth, an adjustable head that tilts from 0° full cutoff to +90° forward throw, a tempered UV-coated flat glass lens, and LED module-to-power-bin thermal separation.

Key Features

• Selectable Wattage: 4-level LV1–LV4 power controller: 80W (100%), 64W (80%), 48W (60%), and 32W (40%) (Medium MWP10 housing)
• Scalable Lumen Output: 4,600 to 11,400 lm across 12 wattage and CCT combinations
• Peak Efficacy: Up to 151 lm/W (142 lm/W at 80W, 4000K)
• CRI: 70 CRI
• Selectable CCT: 3000K / 4000K / 5000K selectable via onboard controller
• Lens & Aiming Optics: Tempered UV-coated flat lens with 0° to +90° adjustable head tilt
• Photocell & Controls: Onboard CCT and wattage slide controllers; compatible with photocell MS-PUNVC01 (field or factory installed)
• Dimming: 0-10V dimming from 10% to 100%
• Electrical & Driver: Electronic universal 120-277V AC, 50/60Hz; single driver (2,120 mA (at 80W) / 1,110 mA (at 67W)); Power Factor >0.9; THD <20%
• Thermal Architecture: LED module and power bin separation design enhances LED efficiency and extends component life
• Location & Body Rating: UL and cUL Wet Location listed; rugged cast-aluminum housing with bronze polyester powder paint
• Operating Temperature: -40°F (-40°C) to 104°F (40°C)
• Dimensions & Weight: 10.0" (256mm) W x 11.0" (280mm) H x 5.09" (129mm) D; Net weight 7.804 lbs
• Certifications & Rebates: DesignLights Consortium (DLC) Premium Qualified (all lumen packages), UL Listed, cUL Listed
• Rated Life & Warranty: Estimated 50,000-hour L70 LED lifespan (IES LM-80 / TM-21); 5-year limited warranty - GLT

Performance & Light Output

Power Switch Setting (System Watts) Selectable CCT Lumen Output Efficacy (LPW) CRI LV1 — 100% (80W) 3000K 10,700 lm 134 lm/W 70 LV1 — 100% (80W) 4000K 11,400 lm 142 lm/W 70 LV1 — 100% (80W) 5000K 11,100 lm 139 lm/W 70 LV2 — 80% (64W) 3000K 8,800 lm 137 lm/W 70 LV2 — 80% (64W) 4000K 9,300 lm 145 lm/W 70 LV2 — 80% (64W) 5000K 9,100 lm 142 lm/W 70 LV3 — 60% (48W) 3000K 6,700 lm 140 lm/W 70 LV3 — 60% (48W) 4000K 7,100 lm 148 lm/W 70 LV3 — 60% (48W) 5000K 7,000 lm 145 lm/W 70 LV4 — 40% (32W) 3000K 4,600 lm 143 lm/W 70 LV4 — 40% (32W) 4000K 4,800 lm 151 lm/W 70 LV4 — 40% (32W) 5000K 4,700 lm 148 lm/W 70

Delivers 70 CRI across all twelve wattage and color temperature combinations. Estimated 50,000-hour LED lifespan (L70) based on IES LM-80 testing results and TM-21 calculations.

Lens & Optics

The MWP10 slim optical assembly combines a tempered UV-coated flat glass lens with a 0° to +90° aiming head:

• 0° Full Cutoff Orientation: Directs illumination straight down along building perimeters, entrances, and stairways with superior uniformity and glare control.
• 0° to +90° Forward-Throw Tilt Adjustments: Pivoting upper LED head tilts outward up to +90 degrees to aim light across wider yards, loading areas, and parking perimeters.

The tempered UV-coated flat lens resists scratching, thermal stress, and ultraviolet degradation in exposed outdoor environments.

Smart & Control Features

Engineered for on-site lumen and color commissioning, 0-10V dimming, and dusk-to-dawn photocell integration:

• On-Site Wattage & CCT Slide Controllers: Dual internal slide switches housed inside the rear power compartment allow contractors to set output across four power levels—LV1 (100% / 80W), LV2 (80%), LV3 (60%), and LV4 (40%)—and three color temperatures (3000K, 4000K, and 5000K).
• 0-10V Continuous Dimming: Supports smooth 0-10V dimming from 10% to 100% for integration with commercial lighting controls and timeclocks.
• Photocell Compatibility: Accepts photocell MS-PUNVC01 (field installed or factory pre-installed by request — sold separately unless ordered with PO photocell option).

Electrical

Powered by a single electronic universal-voltage driver (2,120 mA (at 80W) / 1,110 mA (at 67W) drive current) operating on 120-277V AC at 50/60Hz with a Power Factor >0.9 and Total Harmonic Distortion (THD) <20%. Includes 0-10V dimming control (10%–100% dimming range).

Operating current and amp draw across input voltages for branch circuit and breaker loading calculations:

Nominal Power (Driver Current) 120V Current (A) 208V Current (A) 240V Current (A) 277V Current (A) 80W (100%) (2,120 mA) 0.67A 0.38A 0.33A 0.29A 67W Reference (1,110 mA) 0.56A 0.32A 0.28A 0.24A

Construction

Housing & Thermal: Rugged cast-aluminum housing (Medium MWP10 size) engineered with LED module and power bin separation that isolates driver heat from the LED array to enhance efficacy and extend component life.

Finish: Architectural Dark Bronze polyester powder-coat paint formulated for outdoor corrosion and weather resistance.

Environmental Sealing: UL and cUL Listed for wet locations with a gasketed rear driver box and tempered UV-coated flat lens. Ambient operating temperature: -40°F (-40°C) to 104°F (40°C).

Dimensions & Weight: 10.0" (256mm) W x 11.0" (280mm) H x 5.09" (129mm) D. Net weight: 7.804 lbs.

Installation & Mounting

Mounting Hardware: Low-profile 10.0" (256mm) W x 11.0" (280mm) H x 5.09" (129mm) D (7.804 lbs) cast-aluminum backbox features multi-mount wall installation capability and an articulated upper luminaire head that tilts from 0° full cutoff to +90° via side adjustment bolts.

Conduit & Wiring Access: Separate rear wiring/power compartment provides direct access to the onboard LV1–LV4 power and CCT selector switches and side conduit knockouts.

Accessories (Sold Separately):

• Sensors & Controls: Photocell MS-PUNVC01 (Field-installable or factory pre-installed dusk-to-dawn photocell — sold separately)

Certifications & Rebates

• DLC Premium Listed: DesignLights Consortium (DLC) Qualified and classified for DLC Premium across all lumen packages (verify model SLIM-80FA-UV-CCT / MWP10 on designlights.org)
• UL & cUL Wet Location Listed: Certified for exposed outdoor wet locations

Typical Applications

• Building Perimeters & Modern Facades - Low-profile architectural style tilts from 0° cutoff to +90° while delivering up to 11,400 lumens
• Commercial Entrances & Doorways - Tempered UV-coated flat glass lens provides uniform, low-glare illumination at entry points
• Exterior Stairways & Walkways - 4-level LV1–LV4 wattage selector scales output down to 40% to match lower mounting elevations
• Industrial & Warehouse Security Lighting - Separated LED module and power bin thermal design ensures reliable operation from -40°F (-40°C) to 104°F (40°C)
• Utility Rebate Retrofit Projects - DLC Premium qualification across all selectable lumen packages maximizes energy rebate incentives

What's Included

• GLT SLIM-80FA-UV-CCT (MWP10 80W) Field-Adjustable Slim LED Wall Pack - Dark Bronze
• Integrated LV1–LV4 wattage and 3000K/4000K/5000K CCT slide controllers
• Installation hardware and operation manual