About this product
Air Suspension Structure
10 A164 320 43 13 Hydropneumatic Spring Leg
10 A164 320 44 13 Hydropneumatic Spring Leg
10 A164 320 45 13 Hydropneumatic Spring Leg
10 A164 320 58 13 Air Suspension Strut
10 A164 320 59 13 Air Suspension Strut
10 A164 320 61 13 Air Suspension Strut
15 A000 327 03 69 Connector
20 A164 540 66 10 Wiring Harness
30 N 910105 016002 Hexagon Head Bolt
40 N 000000 005275 Nut
50 N 000000 003905 Nut
50 N 000000 005277 Nut
60 N 000000 003250 Washer
200 A001 545 96 40 Bracket
700 A210 540 21 81 Clutch
705 A000 545 69 80 Gasket
705 A008 545 63 26 Female Contact
Item Specifications
Key Words: Front Air Suspension Shock Strut For Mercedes M-Class W164 ML320 ML350 ML450 ML500 ML550 2005-2011 GL-Class X164 GL320 GL350 GL450 GL550 2007-2012 Without Adaptive Damping
Product Specifics
Part Type: Air Suspension Strut
Fitment Type: Direct Replacement
Size: Single Dimension(CM) 97.00(Length)*16.50(Width)*16.00(Height)
Single Weight(KG): 10.300
Maximum Operating Pressure (psi): 160
Minimum Operating Pressure (psi): 90
Upper Mount Type: Stud
Lower Mount Type: U-Bracket
Included Hardware: None
Drive Layout: Front Engine RWD & 4WD
Platform: X164 W164
Custom Bundle: No
Material: Iron+Aluminium Alloy+Rubber
Quantity: Single
Warranty: 1 Year
OE Spec or Performance/Custom: OE Spec
Adjustable: Yes
Greasable or Sealed: Sealed
Brand: ECCPP
UPC: Does not apply
Manufacturer Part Number: E110555CP01
Interchange Part Number: Air Suspension Shock Strut, Air Ride Shock Strut
Other Part Number: 1643204513
Superseded Part Number: 1643206113
*Platform Drive Layout:
Base Model-Rear Wheel Drive Layout
4Matic Model-Four Wheel Drive Layout
*OEM Part Number: 1643204513,1643206113
*Air Strut Removal Guideline
Caution: Damage to the vehicle and air suspension system can be incurred if work is carried out in a manner other than specified in the instructions or in a different sequence.
1.Set steering to straight ahead.
2.Raise vehicle.
3.Remove front wheel.
4.Disconnect the sway bar linkage.(picture 1)
5.Remove the nut from the ball joint and separate from the spindle assembly.(picture 2)
6.Cut the cable tie securing the wire harness mount, then remove the wire harness mount from shock.(picture 3)
7.Disconnect the air line by unscrewing the brass fitting from the strut's top mount.(picture 4)
8.Remove the three(3)upper mount flange nuts.(picture 5)
9.Remove the lower shock mount nut, followed by the bolt and remove the strut from the vehicle.(picture 6)
*Air Strut Installation Guideline
1.Install the replacement strut onto the vehicle in the same orientation as removed.
2.Install the lower shock mount bolt and nut, tighten to manufacture's specification.(picture 7, 8)
3.Reattach the spindle assembly and install the nut onto the ball joint, tighten to manufacture's specification.(picture 9,10)
4.Using the supplied cable tie, secure the wire harness mount to the shock.(picture 11,12)
5.Using the supplied hardware, install and tighten the top mounting nuts to manufacture's specification.(picture 13)
6.Remove the air line fitting. To do so, spread the collet open and the remaining fitting will slide off of the air hose.(picture 14)
7.Remove the plastic shipping pin from the air inlet fitting, push the air hose in until fully seated into place(air line will not pull out when inserted properly).(picture 15)
8.Installation complete.
Frequently Asked Questions
How to prevent the damage of air springs/How to extend the service life of air springs/struts etc.?
An air strut with separable air springs
If your vehicle offers a separable air suspension (Audi Allroad A6 C5, Mercedes-Benz W164, BMW X5, etc.), you should regularly (about once a week) lift the car to the maximum position, and remove dirt with a high-pressure cleaner (keep the cleaner at a distance to the air spring about 30 cm/12 inches, otherwise water pressure can damage the air spring). The highest position may vary depending on your model and regulation options. Therefore, please test this by trying the different modes available to you (Sport, comfort, dynamic, off-road) and choose the one that sets your vehicle to the highest position. The dirt will most likely be found under the fold of the pneumatic chambers. If you find a frozen layer of bitumen on the piston guide (the part of a strut on which the air spring is installed), it is recommended to clean it as well. Whenever possible, avoid riding on fresh asphalt, as fresh bitumen mixed with sand immediately results in a build-up of abrasives on the piston and in turn contributes to accelerated wear and tear of the air spring.
A complete air suspension shock
Many cars such as Mercedes W220 or W211 are set up with a complete air strut - shock absorber and air spring visually form a complete spare part. In many cases, you can easily recognize these by the metal cups with which the air spring is tightly mounted. To best avoid any damage, we highly recommend to regularly check the condition of the dust protection seals of the air strut.
What is the difference between an air spring and an air strut?
The air spring is a part of the air strut. Some vehicles (e.g. Mercedes ML) allow you to change the air spring separately. At our online shop you have the opportunity to buy either the whole air strut or only the air spring. For some type of vehicles it is not possible to change the air spring separately. In this case the whole air strut should be replaced.
Which side of my car is the Right and Left?
The right and left sides of an automobile are determined as if sitting in the car facing forward. Thus, the left side is on the left when sitting in the car facing forward, and the right side is on the right. For American cars, the drivers side is on the left, and the passenger sits to the right of the driver. For cars in Japan, Britain, Ireland, the Bahamas and some other former British colonies -- where they drive on the left side of the road -- the passenger sits on the left side, and the driver (along with all the driving controls) is on the right.
What does 4MATIC mean?
4MATIC is the marketing name of a four-wheel drive system developed by Mercedes-Benz. It is designed to increase traction in slippery conditions.
What does AIRMATIC mean?
AIRMATIC is a Mercedes-Benz trademark for vehicles with air suspension systems. Compared with a conventional steel suspension, the AIRMATIC air suspension provides advantages in terms of handling safety and ride comfort. The AIRMATIC air suspension automatically adjusts the damping force on each wheel according to the current state of the road.
What does ABC mean?
ABC (Active Body Control) is a registered Mercedes-Benz trademark. It is a high-quality suspension system, which automatically adapts the suspension setting to the respective driving situation. There is also a crosswind stabilisation integrated in ABC systems.
How can I see if my vehicle is equipped with AIRMATIC or ABC?
You can check which suspension you have by opening the bonnet of your car and examining the top of the shock absorber.
Includes
Single for Front Left or Right Air Suspension Shock Strut
Notes : Please double confirm the compatibility as well as the OEM number before purchasing.
Instruction is not included. Professional installation is recommended.
Description supplied by Dynamic Performance Tuning through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.
