Freud Rail and Stile Router Bit 99-290 1/2 Inch Shank One Piece (2 Dia 1-9/32 Carbide Height TiCo Beaded Cabinet Door Frame Joinery Tool)

Precision-Engineered 1/2 Inch Shank 2 Inch Diameter One-Piece Beaded Rail and Stile Router Bit

The Freud 99-290 One-Piece Rail and Stile Router Bit delivers a commercial-duty cabinet door joinery solution engineered to rout both decorative beaded frame stickings and interlocking cope joints using a single cutter. By raising or lowering the bit in a router table without moving the fence assembly, woodworkers eliminate tool changeover downtime during frame milling runs. Manufactured with micro-grain TiCo titanium cobalt carbide cutting flutes and finished with a heat-resistant red Perma-SHIELD coating, this 1/2-inch shank tool features a 2-inch overall diameter and 1-9/32-inch carbide height, operating face-down stock passes at speeds up to 16,000 RPM across hardwoods, softwoods, plywood, and composite timber to maintain flush front frame joints.

Best Used For:

• Single-Bit Beaded Frame Milling: Machining classic 7/32-inch radius beaded profiles on stiles and matching cope joints on rails using simple vertical bit height adjustments.
• Flush Front Cabinet Assemblies: Running frame members face-down to ensure stock thickness inconsistencies are directed exclusively to the back side of the door.
• Traditional Cabinetry Joinery: Milling precision mortise and tenon profiles for raised-panel and flat-panel kitchen or bathroom cabinet doors.

Key Performance & Safety Features

• One-Piece Dual-Profile Design: Routes both frame profile stickings and cope joints without removing the bit or moving the fence depth.
• Face-Down Milling Alignment: Guarantees smooth, flush front faces by transferring wood thickness tolerances to the rear face.
• TiCo Micro-Grain Carbide Flutes: Specialized titanium cobalt carbide formulation holds sharp cutting edges through abrasive hardwood production.
• Perma-SHIELD Thermal Protection: Non-stick red fluoropolymer coating prevents pitch buildup, reduces friction heat, and guards against rust.
• Table Router Exclusive Setup: Engineered specifically for safe material control and zero-chatter shaping on table-mounted routers with fences.

What's Included

• (1) Freud 99-290 2" Diameter One-Piece Rail & Stile Router Bit with 1/2" Shank

Technical Specifications

Brand Name Freud Tools Model Number SKU 99-290 Tool Classification One-Piece Rail & Stile Router Bit (Bead Profile) Shank Diameter Track 0.50 in. (1/2 in.) Overall Cutter Diameter (D) 2.00 in. Carbide Cutting Height (h) 1.28125 in. (1-9/32 in.) Overall Tool Length (H) 4.09375 in. (4-3/32 in.) Small Diameter (n) 1.25 in. (1-1/4 in.) Minor Profile Height (m) 0.234375 in. (15/64 in.) Large Radius Dimension (R1) 0.21875 in. (7/32 in.) Number of Cutters 2 Flutes Maximum Operating Speed 16,000 RPM Required Equipment Setup Table-Mounted Router with Fence Material Applications Hardwood, Softwood, Plywood, Composition Wood

Pro-Tip: When routing cross-grain cope cuts on the ends of narrow rails, use a coping sled or miter gauge backing board to hold stock perfectly perpendicular to the fence. Milling end-grain copes before long-grain stile passes ensures that any minor corner tear-out is cleanly planed away during the final profile run.