Freud 6-5/16-in. x 28T mm Thin Kerf General Purpose Blade (LU86R006M20)

Freud LU86R006M20 6-5/16" (160 mm) x 28T Thin Kerf General Purpose Blade is a 160 mm circular saw blade for users who want one blade that can handle both ripping and crosscutting in common wood materials without swapping back and forth all day. This is a circular saw blade designed for general purpose ripping and crosscutting in wood, plywood, laminate, chipboard, hardwood, and softwood. Model Number: LU86R006M20.

This blade is set up as a thin kerf general purpose option, which matters if you are running a track saw or another 6-5/16" (160 mm) saw where efficient cutting and lower feed resistance make a real difference. The 28-tooth count gives it a practical middle ground between fast feed speed and acceptable finish quality, and the alternate top bevel tooth grind is well suited to clean crosscuts in sheet goods and dimensional stock.

Freud backs up that general purpose role with details that actually matter on the saw. The .098 inch kerf and .063 inch plate are meant to keep the blade cutting efficiently while still staying stable. A 13 degree hook angle helps the blade pull into the work smoothly for faster cutting and easier feed, which is especially useful when you are working through repeated cuts in plywood, hardwood, or softwood.

The cutting edge uses Freud TiCo high-density carbide, which is their carbide blend for longer life and consistent performance. In plain terms, that means the teeth are built to hold an edge longer than bargain blades and keep producing usable cuts over more material. The Perma-Shield non-stick coating also earns its keep by reducing drag and helping fight off heat, pitch buildup, and corrosion. That translates into smoother cutting and less cleanup on the blade body over time.

For application range, Freud calls this blade out for crosscutting thicker hardwoods and softwoods along with ripping thinner stock. One source lists the ideal range as 3/4 inch to 2 inch thick for crosscuts and 1/4 inch to 1 inch for ripping, while another lists crosscutting up to 3-1/2 inches. Either way, the point is the same: this is a versatile everyday blade for wood cutting, but like any combination blade, the cleaner results come when you stay in its intended range instead of asking one blade to do every specialty job.

Fitment is straightforward. The blade diameter is 160 mm and the arbor is 13/16" (20 mm), so it is meant for saws that take that size blade and arbor combination. Blade labeling also notes it is ideal for Festool and other track saws, which makes it a strong option for users looking to upgrade from a stock blade or keep a dependable general-purpose blade ready for jobsite sheet goods and trim stock.

Who should buy it? Woodworkers, cabinet installers, remodelers, and serious DIY users who want one dependable 160 mm blade for everyday cutting. If you need a dedicated finish blade for ultra-clean veneered panels or a dedicated rip blade for thick production ripping, buy those specialty blades too. But if you want a practical all-around cutter that covers most day-to-day work well, this one makes a lot of sense.

Blade Diameter 6-5/16" (160 mm) Arbor Size 13/16" (20 mm) Tooth Count 28 Tooth Grind Alternate Top Bevel (ATB) Kerf 0.098 in Plate Thickness 0.063 in Hook Angle 13 degrees Maximum RPM 12,000 Blade Material Carbide Weight 0.62 lbs Non-Stick Coating Yes Made In Italy

A smart everyday blade for 6-5/16" (160 mm) saws

The Freud LU86R006M20 6-5/16" (160 mm) x 28T Thin Kerf General Purpose Blade is the kind of blade that earns a permanent spot in the case because it handles most wood cutting jobs without drama.

• Who it's for: Track saw users, cabinet guys, remodelers, and serious DIY users who want one reliable general purpose blade for sheet goods and common lumber.
• Why it stands out: The thin kerf, TiCo carbide, Perma-Shield coating, and 28-tooth layout give you a solid mix of speed, efficiency, and everyday cut quality.
• Worth knowing: This is a true do-most-things blade, not a specialty blade. If your work leans heavily toward ultra-clean finish cuts or aggressive thick-stock ripping, add a dedicated blade for those jobs.

• What kind of saw is this blade for? It is a 160 mm circular saw blade with a 20 mm arbor, intended for compatible saws in that size class, including track saw applications.
• Is this blade meant for ripping or crosscutting? Both. It is a general purpose blade designed to handle crosscuts and ripping in wood and common sheet materials.
• Can it be used on laminate and plywood? Yes. Freud lists laminate, plywood, and chipboard among the materials this blade is intended to cut.
• Is it recommended for non-ferrous metal? No. Non-ferrous cutting is not recommended.