About this product
A modular bed organizer for the 2010–2014 Gen 1 Ford F-150 Raptor that bolts down with the stock bed bolts and gives you e-track cutouts to strap gear anywhere on the deck. Laser cut from 10 GA steel, CNC bent and MIG welded in-house at our shop in Arizona, USA.
Gear that slides around the bed gets damaged and damages the bed. A flat deck with e-track cutouts gives you secure strap points wherever you need them, and the modular design lets you configure the setup the way you want it.
What Is In The Kit
- 1 driver side half deck plate
- 1 passenger side half deck plate
- 1 hardware kit with all assembly bolts, nuts and washers
The deck ships in two halves that bolt together in the middle.
Why A Modular Deck
A truck that goes off-road carries different loads on different trips: spares, a jack, fuel, tools, coolers. Fixed tie-down points rarely land where the gear needs them.
The standard e-track cutouts on this deck let you attach straps in different locations to fit whatever you are carrying, and you can bolt jacks and other larger items directly to the tray.
How It Is Built
- Precision laser cut from 10 GA steel
- CNC bent and MIG welded, all in-house at our shop in Arizona, USA
- Powder coated in textured hammer black for corrosion protection
- Standard e-track cutouts in the deck
- Uses the stock bed bolts to hold it down
- Two halves that bolt together in the middle
Options
Base configuration: single laid-flat tire, single stand-up tire, or two stand-up tires.
Rear add-on section: none, or rear base with floor plates.
Accessories: none, quick release jack, 3 gas cans and holders, or quick release jack plus 3 gas cans and holders.
Fitment
2010–2014 Gen 1 Ford F-150 Raptor. Mounts with the stock bed bolts.
Questions
How does it mount?
It is designed to use the stock bed bolts to hold it down in the bed of the truck.
Can I bolt a jack to it?
Yes. Jacks and other larger items can be bolted down to the tray, and a quick release jack is available as an accessory.
Why does it come in two pieces?
It ships in two halves that bolt together in the middle. All of the assembly bolts, nuts and washers are included.
Where is it made?
Laser cut, bent and welded in-house at our shop in Arizona, USA.
Description supplied by Apollo Off-Road through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.
