About this product
Reinforce the factory lower control arm pocket mounts on your 2017-2026 Ford Raptor with the Foutz Motorsports Weld-On Lower Control Arm Pocket Reinforcement Gusset Kit.
Designed for Gen 2 and Gen 3 Raptors, these precision-cut gussets help strengthen a common high-stress area to reduce bending and cracking during aggressive off-road use.
Features
- Designed to weld directly onto the stock lower control arm mounts
- Protects the mounts on the factory lower control arms from bending, cracking, and trail damage
- Enhances structural strength at a common high-stress point on the front suspension
- Made from .190" thick steel, precision laser-cut in-house for an exact fit
- Engineered to sit flush with the complete outer surface of the stock lower arm mount plates
- 2 drain holes in the base let water escape and help prevent corrosion
- Compatible with our Slot Delete Insert kits
Why Is This Kit Different?
- Full-surface fitment — Designed to fit as close as possible to the complete outer surface of the stock lower arm mount plates
- Edge-to-edge coverage — Extends to the outer edges of the plate, not just the surface
- Two-point weld attachment — Welds attach to both the stock base plate and the upper edge of the frame, strengthening the whole assembly
- Over 1/4" combined thickness — Added material + stock plates reinforce the mounting area on each side
What Each Gusset Plate Does
- Top cross plate — Prevents the pocket from folding in and adds weld area at the point where cracks most commonly start and tear off the frame
- Pocket plates — Extends to the outer edges of the stock mount so welds attach to both the base plate and the upper edge of the frame, strengthening the whole assembly
- Bottom cap plate — Supports the width of the mount and keeps the side plates from folding in at the stock lower arm pivot area
- Drain holes — Integrated into each gusset to prevent water buildup
Material & Durability
- .190" precision-cut steel — Reinforces a common high-stress area of the front suspension against off-road damage
Fitment & Compatibility
- Fits 2017–2020 Gen 2 Ford Raptor
- Fits 2021–2026 Gen 3 Ford Raptor
- Works for 2017–2026 F-150 Raptors
- Direct weld-on install — Designed to weld straight onto the factory mounts
- Slot Delete compatible — Fully compatible with the Foutz Lower Arm Slot Delete Insert Kit
Installation Note
Requires welding by a qualified welder. Not intended for DIY installation without proper welding equipment and experience.
Description supplied by Apollo Off-Road through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.
