About this product
Firegear 32" SS Square Pan Gas Fire Pit Kit w/ Remote FPB-32SBSAWS-P Review
Looking for the best fire pit kit for your outdoor entertainment area? Check out the Firegear 32" SS Square Pan Gas Fire Pit Kit w/ Remote FPB-32SBSAWS-P now!
The All-Weather Electronic Ignition System is what allows a fire pit to be operated with remote control. It also provides the necessary safety features and includes a plug-in transformer that lets you plugged it into an outdoor ground-fault 120V/15A outlet. The valve system connects to a fire pit burner. A pilot assembly ignites the burner flame and also is a safety feature as it has a flame sensor. If the unit does not sense any flame, it will try to reignite and if it can't, it will shut down on its own. This system adds safety and convenience to your fire feature.
Disclaimer: Btu listings are based on 7.0”WC for Natural Gas and 11.0”WC for Liquid Propane (LP) at the burner orifice when using Firegear Outdoors Burning Spurs.If you use a burner other than a Burning Spur, Btu’s will vary.
Features
- Stainless steel square drop-in pan
- Stainless steel burning spur
- AWS fully electronic ignition - 30VDC (Requires 120Vac) - Assembled (GOE-30VDC) power supply, AWS control panel with On/OFF weatherproof switch
- Propane conversion kits sold separately.
Buy Firegear 32" SS Square Pan Gas Fire Pit Kit w/ Remote FPB-32SBSAWS-P today. Available here at Flame Authority, your Trusted Dealer!
Manuals
- Firegear Product Guide
- Media Guide for Firegear 32" SS Square Pan Gas Fire Pit Kit w/ Remote FPB-32SBSAWS-P
Need assistance? Talk to an Expert at +1-800-923-4556 or email: support@flameauthority.com to get the best-suited Fire Pit Burner Kits for your needs.
Specifications
- Pan Size: 32"
- Burner Size: 31"
-
Gas Type: Liquid Propane
- BTU: 175,000 (51.28kW)
- Depth: 2½”
- Min/Max Opening or Dimension: 32 ¼”- 33”
- Inside/Outside Dimention: 32”ID
- Ground Level: 18”
- Side Wall: 36”
- Combustible Ceiling: 120”
- Combustible Floor: 18”
- Orifice Size# for Natural Gas: 5
- Orifice Size# for Liquid Propane: 26
Gas Pressure
Min. Inlet
- Natural Gas: 3.5” WC (⅛ PSI) (0.87kPa)
- Liquid Propane: 8.0” WC (⅓ PSI) (1.99kPa)
Max. Inlet
- Natural Gas: 14.0” WC (½ PSI) (3.48kPa)
- Liquid Propane: 14.0” WC (½ PSI) (3.48kPa)
Normal Inlet
- Natural Gas: 7.0” WC (¼ PSI) (1.74 kPa)
- Liquid Propane: 11.0” WC (⅓ PSI) (2.73 kPa)
Caution: DO NOT USE REGULAR STONE OR ROCK due to susceptibility of explosion.
Glass and Media
How much Media should I use?
-
Lava Rock Only: 25 lbs
-
Lava Rock as a Base: 25 lbs
-
Glass (on top of Lava Rock): 50 lbs
-
Lava Stones (on top of Lava Rock): 30 lbs
- Glass Only: 110 lbs
Black Lava Rock 10 lb. Bag
Black Lava Rock 40 lb. Bag
Dark Gray Lava Stones
Black Broken Glass
Copper Broken Glass
Crystal Broken Glass
Dark Blue Broken Glass
Light Blue Broken Glass
Seabreeze Broken Glass
Black Reflective Glass
Bronze Reflective Glass
Cobalt Reflective Glass
Copper Reflective Glass
Silver Reflective Glass
Optional Accessories
Stainless Steel Lid - LID-32S
- Made of 304 stainless steel
- Brushed finished round lid
- Sleek and round flat design for a contemporary look
2 pcs Flexible Frame - FLEXFRAME-SS
- Allows you the flexibility to fill the gap between the fire pit structure and the pan.
- Engineered to protect against the outdoor elements including salt water environment
- Flexible and easy to adapt for round, square, and rectangular fire pits.
3 pcs Flexible Frame - FLEXFRAME-SS3
- Allows you the flexibility to fill the gap between the fire pit structure and the pan.
- Engineered to protect against the outdoor elements including salt water environment
- Flexible and easy to adapt for round, square, and rectangular fire pits.
Paver Control Panel Kit - PAVER-CP-AWS
For use when building fire pit enclosures with SRW block and an AWS burner system. Thermocouple Piloted Safety "TPSI" Burner Systems.SRW bracket kit and extender, Lintel - 12” L x 3” W, Screws and fittings, Tapcon® concrete anchors.Paver Vent Kit - PAVER-VENT-4-LNTS
- Stainless Steel Paver Vent Kit with Lintel: includes (2) 3 5/8" tall x 8" wide vents with mounting plate, extension plate extends overall size up to 10" wide and two (2) Tapcon self-tapping concrete anchors and Lintel 12" Long x 3" Wide (20 Gauge Galvanized Steel). Each vent provides 18 square inches of ventilation.
Paver Vent Kit - PAVER-VENT-6-LNTS
- Stainless Steel Paver Vent Kit with Lintel: includes (2) 5 5/8" tall x 8" wide vents with mounting plate, extension plate extends overall size up to 10" wide and two (2) Tapcon self-tapping concrete anchors and Lintel 12" Long x 3" Wide (20 Gauge Galvanized Steel). Each vent provides 18 square inches of ventilation.
Description supplied by Flame Authority through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.
