About this product
Key Features
Overview
The Festool 576927 Circular Saw 36-Tooth Blade for Kapex KSC 60 is a wood universal saw blade built for clean, efficient cutting across a wide range of wood materials and soft plastics. This is a circular saw blade designed for crosscutting and rip cutting wood, sheet goods, and soft plastic on compatible Festool miter saws. Model Number: 576927. If you use a Kapex KSC 60 and want one blade that can stay on the saw for most day-to-day trim, panel, and general wood cutting, this is the practical choice.
What makes this blade matter is how it balances finish and versatility. The 36-tooth configuration with alternating teeth and a medium chip angle is aimed at users who do not want to swap blades every time the material changes. It is suited for solid wood, plywood, MDF, HDF, building panels, gypsum fibre boards, and soft plastics. In real use, that means it covers a lot of the cuts a carpenter, installer, or remodeler sees in a normal week without pushing too far toward either rough framing speed or ultra-fine finish work.
Festool calls this its WOOD UNIVERSAL blade, and that description fits. The carbide teeth are there to hold edge life and maintain cut quality over time, not just to look good on a spec sheet. Tooth geometry is optimized for the intended machine and application, which matters because blade design and saw design work together. When the plate, tooth shape, and machine are matched correctly, you get steadier tracking, cleaner entry and exit, and less fuss when accuracy matters.
Size is another key part of the story here. This blade uses an 8-1/2 inch diameter, a 3/32 inch cutting width, and a 1-3/16 inch arbor. Those dimensions are not random. They are what make it compatible with the Festool KSC 60, and they directly affect how the blade runs in the saw. A correct arbor fit and proper kerf help the saw cut predictably and help the operator get the finish quality the machine is known for.
On material range, this blade is aimed squarely at finish carpentry and general jobsite cutting where the workload includes more than one type of stock. It is a strong fit for cutting strips of solid wood, layered wood products, MDF, HDF, and similar sheet materials. It also handles soft plastics, which is useful for installers and cabinet crews who move between trim parts, panel products, and lighter synthetic materials.
From a system standpoint, the big point is compatibility with Festool sliding compound miter saw platforms. Sources specifically call out the Festool KS 60 sliding compound miter saw and the KSC 60 cordless sliding compound miter saw, with direct suitability for the KSC 60. If you are buying into the Festool saw system, this is the blade meant to keep that setup working the way it should. The yellow Festool color coding also makes blade selection easier when you keep more than one blade on hand for different materials.
Who should buy it? This blade makes the most sense for trim carpenters, remodelers, cabinet installers, punch-list crews, and serious DIY users running a compatible Festool miter saw who want one dependable wood-cutting blade for broad everyday use. If your work jumps between solid wood, plywood, MDF, and soft plastic and you care about clean results without constant blade changes, this is the right kind of blade. If you need a very specialized finish blade or a blade for heavy production rough cutting only, you would look more narrowly. For most users, though, this is the smart middle-ground blade that earns its keep.
Built for Clean, Flexible Cutting
This blade is aimed at the kind of cutting most users actually do: not one perfect material all day, but a mix of wood products where you still want clean edges and dependable performance.
- 36-tooth design with alternating teeth for both rip cuts and crosscuts
- Works across solid wood, plywood, MDF, HDF, building panels, gypsum fibre boards, and soft plastics
- Carbide teeth are built for long service life and consistent cut quality
What's in the Box
- (1) Festool 576927 WOOD UNIVERSAL saw blade
Key Specifications
Compatibility
Built For
Pro Tip
If your KSC 60 handles a mix of plywood, solid trim, and MDF in the same day, leave this 36-tooth blade on the saw as your default setup. It is the kind of blade that saves time because it covers a wide material range without forcing a blade swap every few cuts.
Tool Nut's Take
Festool 576927 Circular Saw 36-Tooth Blade for Kapex KSC 60 Is the Smart Default Blade
If you want one blade that covers the bulk of your wood and sheet-good work on a compatible Festool miter saw, this is the one we would start with.
- Who it's for: Pros and serious DIY users running a Festool KS 60 or KSC 60 who need one dependable miter saw blade for general wood cutting, trim work, and panel stock.
- Why it stands out: The 36-tooth layout, carbide teeth, and machine-specific geometry make it versatile without feeling like a compromise piece.
- Worth knowing: This is a broad-use wood and soft-plastic blade, not a niche specialty blade. That is exactly why it makes sense for most users.
Common Questions
- What materials is this blade designed to cut? It is designed for solid wood, plywood, MDF, HDF, wood composites, building panels, gypsum fibre boards, and soft plastics.
- Is this blade made for rip cuts or crosscuts? Both. The alternating tooth design and medium chip angle make it suitable for rip cuts and crosscuts.
- What saw is it suitable for? Sources specifically list it as suitable for the Festool KSC 60 and as a coordinated system match with the Festool KS 60 and KSC 60 sliding compound miter saw platforms.
- What size blade is it? It has an 8-1/2" (216 mm) diameter, 30 mm arbor, and 1/16" (2.3 mm) kerf.
Description supplied by Tool Nut through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.
