Festool 500367 MFT/3 Guide Plates for Conturo Edge Bander - 15 Pack

The Festool 500367 MFT/3 Guide Plates for CONTURO Edge Bander 15-Pack is a guide plate accessory set for the Festool CONTURO edge banding system. This is a guide plate accessory designed for stationary edge banding applications. Model number 500367. If you are setting up a KA 65 for bench or MFT use, these plates give you the low-friction support surface that helps guide the workpiece safely and keeps the material from dragging across the table.

What matters here is not just that these are replacement plates, but what they do in use. Festool specifies them for the KA 65 table insert and for stationary use of the edge bander with adapter plate AP-KA 65 in an MFT setup or a separate workbench. That means they are part of the surface the panel rides on during edge banding. A smooth, low-friction contact area makes feeding easier, reduces hang-ups, and helps keep the work consistent when you are working through cabinet parts or other finished panels.

This pack includes 15 guide plates, which is useful for two kinds of buyers. First, it is a straightforward replacement set for worn or damaged plates in an existing setup. Second, it works as an extension set when you want to build out a larger stationary support area around the CONTURO system. That is the practical value here: you are not buying a generic strip of hardware, you are buying a purpose-built part for a specific Festool edge banding station.

Festool also includes M4 screws for fastening, so you have the hardware needed to mount the plates as intended. The plates are listed at 10 inches long, about 1-1/8 inches wide, and 1/4 inch thick, which makes them compact enough to integrate into a bench layout while still providing a usable sliding surface. The metal construction adds durability for repeated shop use.

From a workflow standpoint, these guide plates are about making stationary edge banding smoother and more controlled. If you are using the CONTURO KA 65 in a fixed setup instead of only hand-guided operation, these parts help turn the bench into a more predictable working platform. That is especially useful when you are dealing with multiple parts, narrow components, or finished panels where surface protection matters.

Compatibility is the key buying decision. These are suitable for the AP-KA 65 and MFT GP-KA 65 MFT/3 setups, and they are intended for the Festool CONTURO Edge Bander KA 65 system. If that is your platform, this accessory makes sense. If you are not running a KA 65 stationary setup, it does not. This is a specialized shop accessory, and that is a good thing because it is built to solve a specific problem instead of trying to be universal.

Who should buy this? Cabinet shops, finish carpenters, millwork crews, and serious woodworkers who use the Festool CONTURO in a bench-mounted or MFT-based station. If you are maintaining a KA 65 workstation, replacing worn guide surfaces, or expanding your support area for cleaner edge banding workflow, this is the right accessory. If you need a general-purpose plate for some unrelated bench project, look elsewhere.

Accessory Type Guide Plate for CONTURO Edge Bander Dimensions (L x W x H) 10 x 1-1/8 x 10-1/16" x 1-1/4" x 1/4" (255 x 31 x 6 mm) Material Metal Piece Count 15 Fastening Hardware M4 screws included Weight 3 lbs Made In Germany

Festool 500367 MFT/3 Guide Plates for CONTURO Edge Bander 15-Pack keeps a KA 65 station working the way it should

This is the kind of accessory that only matters if you actually use a stationary edge banding setup, but if you do, it matters a lot.

• Who it's for: Shops and serious woodworkers using a Festool CONTURO KA 65 with an MFT or dedicated bench setup.
• Why it stands out: You get fifteen purpose-built low-friction guide plates, not a workaround, and that makes a difference in how smoothly panels feed during edge banding.
• Worth knowing: This is a specialized system accessory, not a universal hardware part. It is the right buy if you already own the KA 65 stationary setup parts.

• What is this accessory used for? It provides a low-friction guide surface for stationary edge banding applications with the Festool CONTURO KA 65 system.
• Which Festool system is it compatible with? It is designed for the Festool CONTURO Edge Bander KA 65 and stationary setups using the AP-KA 65 and MFT-related configurations listed by Festool.
• Can these be used as replacements? Yes. Festool identifies them as replacement or extension guide plates for stationary use.
• What size are the plates? Each plate is listed at 10 x 1-1/8 x 10-1/16" x 1-1/4" x 1/4" (255 x 31 x 6 mm).