Fab Fours Matrix Front Bumpers For 2017-2022 Ford F-250/350

Equipped to hold a 30 Inch light bar and a 12,000 Pounds Winch, the Fab Fours Matrix Bumper Series gives you the peak of style and utility for your truck. This bumper is a combination of the best aspects of the Premium Winch Bumper and the Vengeance Bumper Series to give you the best slim fitting steel bumper in the truck game. If you are looking for one bumper that checks every box, look no further than the Matrix Series from Fab Fours.

Product Specifications

Without Grill Guard ACC Compatible

• Winch ready for Warn Zeon 12 or Lower. Bolt Pattern is 10″x4.5″. See below section of Relocation Kit Part Numbers.
• Center mount accommodates a single row 30″ light bar (not included). Double row can be used if not running a winch
• Accommodates factory 360° camera (2017-2023 models). Minor camera interference with Pre-runner and Full Grille Guard
• Side mounting slots and tabs will hold up to (4) 3″ X 3″ cube lights (lights not included). Flush Mounts will not work. Must use single bolt setup.
• Accommodates Adaptive Cruise Control.
• Standard Design Available in Full Guard / Pre-runner Guard/ No Guard options (Meets Factory Wheel Well)
• Slim “High and Tight” Design
• Removable light inserts for optimal customization
• Provides far more tire clearance.
• Integrated D-Ring Mounts
• Tremor packages that include factory winch are not compatible.

• Warn Relocation Kits: Winches

  89970 ZEON, Short Kit (31”)

  89960 ZEON, Long Kit (78”)

  89970 ZEON Platinum, Short Kit (31”)

  92193 ZEON Platinum, Long Kit (78”)

  106011 VR EVO, Long Kit (78”)

Type 1-Piece Tubular No Air Bag Compatible No Finish Powder Coated Color Black Material Steel Drilling Required No With Mounting Hardware Yes Hitch Type Without Receiver Maximum Gross Trailer Weight Without Receiver Maximum Tongue Weight Without Receiver With Grille Guard No With Grille Insert No With Bull Bar No With Winch Mount Yes Winch Compatible Yes Tow Hooks With Tow Hook Mounts D-Rings With D-Ring Mounts With Light Cutouts Yes Light Type 30 Inch Light Bar/ Four Cube LED Lights - Sold Separately With Skid Plate No With Spare Tire Mount No With License Plate Mount No With Jacking Points Yes With CB Antenna Mount No Estimated Install Time (Hours) 4

With Pre-Runner Guard ACC Compatible

• Winch ready for Warn Zeon 12 or Lower. Bolt Pattern is 10″x4.5″. See below section of Relocation Kit Part Numbers.
• Center mount accommodates a single row 30″ light bar (not included). Double row can be used if not running a winch
• Accommodates factory 360° camera: Minor camera interference with Pre-runner and Full Grille Guard
• Side mounting slots and tabs will hold up to (4) 3″ X 3″ cube lights (lights not included). Flush Mounts will not work. Must use single bolt setup.
• Accommodates Adaptive Cruise Control.
• Available in Full Guard / Pre-runner Guard/ No Guard options (Meets Factory Wheel Well)
• Slim “High and Tight” Design
• Removable light inserts for optimal customization
• Provides far more tire clearance.
• Integrated D-Ring Mounts
• Tremor packages that include factory winch are not compatible.
• Warn Relocation Kits: Winches: 89970 ZEON, Short Kit (31”)89960 ZEON, Long Kit (78”)89970 ZEON Platinum, Short Kit (31”)92193 ZEON Platinum, Long Kit (78”)106011 VR EVO, Long Kit (78”)

Type 1-Piece Tubular No Air Bag Compatible No Finish Powder Coated Color Black Material Steel Drilling Required No With Mounting Hardware Yes Hitch Type Without Receiver Maximum Gross Trailer Weight Without Receiver Maximum Tongue Weight Without Receiver With Grille Guard No With Grille Insert No With Bull Bar No With Winch Mount Yes Winch Compatible Yes Tow Hooks Not Compatible With Tow Hooks D-Rings With D-Ring Mounts With Light Cutouts Yes Light Type 30 Inch Light Bar/ Four Cube LED Lights - Sold Separately With Skid Plate No With Spare Tire Mount No With License Plate Mount No With Jacking Points Yes With CB Antenna Mount No Estimated Install Time (Hours) 4

With Full Grill Guard ACC Compatible

• Winch ready for Warn Zeon 12 or Lower. Bolt Pattern is 10″x4.5″. See below section of Relocation Kit Part Numbers.
• Center mount accommodates a single row 30″ light bar (not included). Double row can be used if not running a winch
• Accommodates factory 360° camera: Minor camera interference with Pre-runner and Full Grille Guard
• Side mounting slots and tabs will hold up to (4) 3″ X 3″ cube lights (lights not included). Flush Mounts will not work. Must use single bolt setup.
• Accommodates Adaptive Cruise Control.
• Standard Design Available in Full Guard / Pre-runner Guard/ No Guard options (Meets Factory Wheel Well)
• Slim “High and Tight” Design
• Removable light inserts for optimal customization
• Provides far more tire clearance.
• Integrated D-Ring Mounts
• Tremor packages that include factory winch are not compatible.
• Warn Relocation Kits: Winches: 89970 ZEON, Short Kit (31”)89960 ZEON, Long Kit (78”)89970 ZEON Platinum, Short Kit (31”)92193 ZEON Platinum, Long Kit (78”)106011 VR EVO, Long Kit (78”)

ype 1-Piece Tubular No Air Bag Compatible No Finish Powder Coated Color Black Material Steel Drilling Required No With Mounting Hardware Yes Hitch Type Without Receiver Maximum Gross Trailer Weight Without Receiver Maximum Tongue Weight Without Receiver With Grille Guard Yes With Grille Insert No With Bull Bar No With Winch Mount Yes Winch Compatible Yes Tow Hooks With Tow Hook Mounts D-Rings With D-Ring Mounts With Light Cutouts Yes Light Type 30 Inch Light Bar/ Four Cube LED Lights - Sold Separately With Skid Plate No With Spare Tire Mount No With License Plate Mount No With Jacking Points Yes With CB Antenna Mount No Estimated Install Time (Hours) 4

Without Grill Guard OFS

• Winch ready for Warn Zeon 12 or Lower. Bolt Pattern is 10″x4.5″. See Notes Section of Relocation Kit Part Numbers.
• Center mount accommodates a single row 30″ light bar (not included). Double row can be used if not running a winch
• Accommodates factory 360° camera (2017-2023 models). Minor camera interference with Pre-runner and Full Grille Guard
• Side mounting slots and tabs will hold up to (4) 3″ X 3″ cube lights (lights not included). Flush Mounts will not work. Must use single bolt setup.
• Accommodates Adaptive Cruise Control.
• Standard Design Available in Full Guard / Pre-runner Guard/ No Guard options (Meets Factory Wheel Well)
• Open Fender Design Available in Full Guard / Pre-runner Guard/ No Guard options (Shorter Wheel Well Extension)
• Slim “High and Tight” Design
• Removable light inserts for optimal customization
• Provides far more tire clearance.
• Integrated D-Ring Mounts
• Made to fit w/ our Open Fender System (OFS)
• Tremor packages that include factory winch are not compatible.
• Warn Relocation Kits: Winches: 89970 ZEON, Short Kit (31”)89960 ZEON, Long Kit (78”)89970 ZEON Platinum, Short Kit (31”)92193 ZEON Platinum, Long Kit (78”)106011 VR EVO, Long Kit (78”)

Type 1-Piece Tubular No Air Bag Compatible No Finish Powder Coated Color Black Material Steel Drilling Required Yes With Mounting Hardware Yes Hitch Type Without Receiver Maximum Gross Trailer Weight Without Receiver Maximum Tongue Weight Without Receiver With Grille Guard No With Grille Insert No With Bull Bar No With Winch Mount Yes Winch Compatible Yes Tow Hooks With Tow Hook Mounts D-Rings With D-Ring Mounts With Light Cutouts Yes Light Type 30 Inch Light Bar/ Four Cube Lights - Sold Separately With Skid Plate No With Spare Tire Mount No With License Plate Mount No With Jacking Points Yes With CB Antenna Mount No Estimated Install Time (Hours) 4

With Pre-Runner Guard OFS

• Winch ready for Warn Zeon 12 or Lower. Bolt Pattern is 10″x4.5″. See Notes Section of Relocation Kit Part Numbers.
• Center mount accommodates a single row 30″ light bar (not included). Double row can be used if not running a winch
• Accommodates factory 360° camera (2017-2023 models). Minor camera interference with Pre-runner and Full Grille Guard
• Side mounting slots and tabs will hold up to (4) 3″ X 3″ cube lights (lights not included). Flush Mounts will not work. Must use single bolt setup.
• Accommodates Adaptive Cruise Control.
• Standard Design Available in Full Guard / Pre-runner Guard/ No Guard options (Meets Factory Wheel Well)
• Open Fender Design Available in Full Guard / Pre-runner Guard/ No Guard options (Shorter Wheel Well Extension)
• Slim “High and Tight” Design
• Removable light inserts for optimal customization
• Provides far more tire clearance.
• Integrated D-Ring Mounts
• Made to fit w/ our Open Fender System (OFS)

Type 1-Piece Tubular No Air Bag Compatible Yes Finish Powder Coated Color Black Material Steel Drilling Required Yes With Mounting Hardware Yes Hitch Type Without Receiver Maximum Gross Trailer Weight Without Receiver Maximum Tongue Weight Without Receiver With Grille Guard No With Grille Insert No With Bull Bar Yes With Winch Mount Yes Winch Compatible Yes Tow Hooks Not Compatible With Tow Hooks D-Rings With D-Ring Mounts With Light Cutouts Yes Light Type 30 Inch Light Bar/ Four Cube Lights - Sold Separately With Skid Plate No With Spare Tire Mount No With License Plate Mount No With Jacking Points Yes With CB Antenna Mount No Estimated Install Time (Hours) 4

With Full Grill Guard OFS

Type 1-Piece Tubular No Air Bag Compatible No Finish Powder Coated Color Black Material Steel Drilling Required Yes With Mounting Hardware Yes Hitch Type Without Receiver Maximum Gross Trailer Weight Without Receiver Maximum Tongue Weight Without Receiver With Grille Guard Yes With Grille Insert No With Bull Bar No With Winch Mount Yes Winch Compatible Yes Tow Hooks With Tow Hook Mounts D-Rings With D-Ring Mounts With Light Cutouts Yes Light Type 30 Inch Light Bar/ Four Cube Lights - Sold Separately With Skid Plate No With Spare Tire Mount No With License Plate Mount No With Jacking Points Yes With CB Antenna Mount No Estimated Install Time (Hours) 4

 

Installation Guide

ACC Compatible

Open Fender System