About this product
Empire White Mountain Hearth LS-30RSS 30" Super Sassafras Refractory Gas Log Set
The Empire White Mountain Hearth LS-30RSS is a 30-inch, seven-piece Super Sassafras refractory gas log set designed for a compatible 30" Empire Slope Glaze burner. Its hand-painted refractory construction creates a substantial traditional fireplace presentation, while the separately selected burner determines the fuel type, ignition, controls, BTU input, and final operating configuration.
This listing is for the LS-30RSS Super Sassafras refractory logs only. The Slope Glaze burner, controls, firebox, gas-supply components, and accessories are not included unless specifically stated elsewhere in the offer.
The LS-30RSS logs themselves do not determine fuel type. Select the exact Slope Glaze burner configured for the fuel supply at the installation site.
Large 30" Super Sassafras Refractory Log Presentation
The LS-30RSS is designed for buyers who want the look of a substantial traditional wood fire while using a compatible Empire gas burner platform.
Its seven-piece refractory construction and hand-painted wood detailing create a fuller, layered presentation compared with simpler log arrangements.
Empire's Slope Glaze system is available with several control configurations, allowing the log set to be matched with the burner based on fuel type, control preference, fireplace dimensions, and installation requirements.
Empire LS-30RSS at a Glance
Brand
Empire White Mountain Hearth
Model
LS-30RSS
Product Type
Refractory Gas Log Set
Log Style
Super Sassafras
Nominal Size
30"
Number of Logs
7 Pieces
Construction
Refractory
Finish
Hand-Painted Wood Appearance
Burner Included
No
LS-30RSS vs. LS-30RS: What's the Difference?
These two Empire model numbers identify different Sassafras log sets and should not be used interchangeably.
Is the Empire LS-30RSS Right for Your Fireplace?
Best For
- Buyers wanting Empire's seven-piece Super Sassafras log arrangement.
- Projects requiring a 30" refractory gas-log set.
- Installations using a compatible 30" Empire Slope Glaze burner.
- Natural Gas configurations using the correct burner.
- Propane configurations using the correct burner.
- Manual-control burner configurations.
- Millivolt-control burner configurations.
- Variable-flame burner configurations.
- Intermittent-pilot burner configurations.
- Fireplaces or fireboxes meeting the requirements of the selected burner.
Choose Another Configuration If
- You need a complete burner-and-log package.
- Your existing burner is not approved for the LS-30RSS.
- Your fireplace cannot accommodate the required 30" burner system.
- You need an 18" or 24" log set.
- You cannot meet combustion-air requirements for vent-free use.
- You cannot meet the required clearances.
- Local regulations prohibit the intended installation type.
What's Included?
Included
- 1 × Empire White Mountain Hearth LS-30RSS 30" Super Sassafras Refractory Log Set
- 7 refractory logs
Not Included
- Slope Glaze burner
- Gas controls unless supplied with a separately purchased burner
- Firebox
- Gas-supply components
- Accessories unless specifically included elsewhere in the offer
Compatible Empire Fireboxes
Empire's supplied product information lists the LS-30RSS for the following Empire fireboxes:
VFD42FB
Manufacturer-listed compatible Empire firebox.
VFP42FB
Manufacturer-listed compatible Empire firebox.
VFS42FB
Manufacturer-listed compatible Empire firebox.
Compatible 30" Empire Slope Glaze Burner Options
The LS-30RSS requires a compatible 30-inch Empire Slope Glaze burner.
VFSM-30
Manual control with standing pilot and piezo ignition.
VFSR-30
On/off millivolt control with standing pilot.
VFSV-30
Variable-flame control with variable remote and standing pilot/piezo.
VFSE-30
Intermittent-pilot system with thermostat variable remote.
30" Slope Glaze Burner Comparison
Natural Gas or Propane?
The LS-30RSS log set itself is not a gas-conversion component.
Natural Gas or Propane compatibility is determined by the selected Slope Glaze burner. Empire's supplied burner documentation lists separate specifications for Natural Gas and Propane configurations.
Natural Gas
Select the exact 30" Slope Glaze burner designed for Natural Gas.
Propane / LP
Select the exact 30" Slope Glaze burner designed for Propane.
BTU Output Comes From the Burner
The LS-30RSS refractory logs do not have an independent BTU input rating.
The supplied Empire brochure lists the referenced 30" vent-free Slope Glaze burner families at a maximum input of 38,000 BTU.
Vent-Free Installation Considerations
A vent-free Slope Glaze burner uses room air for combustion and therefore requires sufficient combustion and ventilation air.
Empire's documentation also notes that water vapor is a normal by-product of unvented gas combustion.
The selected burner must be correctly sized and installed for the room and application, and the installation must satisfy all applicable manufacturer and code requirements.
Local Codes & Installation Restrictions
State and local codes can restrict or prohibit vent-free operation.
Confirm the installation type, fuel configuration, combustion-air requirements, and local requirements before ordering or installing the system.
Correct Log Placement Matters
Correct positioning is important for both appearance and burner performance.
Flame Pattern
Correct positioning helps maintain the intended flame path around the logs.
Combustion
Incorrect positioning can interfere with burner operation.
Soot Prevention
Improper flame contact can contribute to unwanted soot formation.
Fans, Drafts & Flame Behavior
Do not allow ceiling fans, portable fans, air registers, or other strong drafts to alter the burner flame pattern.
Drafts can cause flame impingement against the logs or firebox and may contribute to improper combustion or sooting.
Installation & Safety Requirements
- Verify fireplace or firebox dimensions before ordering.
- Confirm the exact 30" Empire Slope Glaze burner.
- Select the correct Natural Gas or Propane configuration.
- Follow all clearances specified for the exact burner.
- Provide adequate combustion and ventilation air for vent-free use.
- Keep combustible materials away from the appliance.
- Do not allow fans or drafts to alter the flame pattern.
- Keep burner openings and air passages free of dust, lint, pet hair, and debris.
- Do not operate with damaged or incorrectly positioned logs.
- Do not add extra logs or unapproved decorative material.
- Have installation and service performed by a qualified installer, service agency, or gas supplier.
Care & Maintenance
- Keep the burner and control compartment clean.
- Keep burner air openings free of dirt and obstructions.
- Do not operate the appliance with damaged logs.
- Correct any log-positioning issue before operating the burner.
- Avoid drafts that disturb the intended flame pattern.
- Follow the maintenance instructions for the exact burner.
- Have the appliance inspected and serviced as directed by Empire.
Warranty Information
Vent-Free Parts
Five-year limited warranty with five-year limited labor warranty, according to the supplied brochure.
Vented Parts
Three-year limited warranty, according to the supplied brochure.
Remote Controls
One-year limited parts warranty, according to the supplied brochure.
Complete Empire LS-30RSS Specifications
Flame Authority Expert Recommendation
Choose the Empire White Mountain Hearth LS-30RSS when you specifically want the 30" seven-piece Super Sassafras refractory presentation and have identified a compatible 30" Empire Slope Glaze burner.
The key advantage is flexibility: the decorative log set can be paired with different Empire control styles and either Natural Gas or Propane burner configurations while maintaining the coordinated Super Sassafras appearance.
Before ordering, verify the exact burner model, fuel type, control system, fireplace dimensions, combustion-air requirements, clearances, log placement, installation type, and applicable local requirements.
Official Manufacturer Resources
Empire LS-30RSS FAQs
The LS-30RSS is a 30-inch, seven-piece Super Sassafras refractory gas log set designed for a compatible 30" Empire Slope Glaze burner.
No. The LS-30RSS is the refractory log set only. A compatible 30" Slope Glaze burner must be purchased separately.
The LS-30RSS includes seven refractory logs.
No. LS-30RSS is the seven-piece Super Sassafras model, while LS-30RS is the six-piece standard Sassafras model.
Yes, when paired with an approved 30" Slope Glaze burner configured for Natural Gas.
Yes, when paired with an approved 30" Slope Glaze burner configured for Propane.
The LS-30RSS requires a compatible 30-inch Empire Slope Glaze burner.
The supplied information documents VFSM manual, VFSR millivolt, VFSV variable-flame, and VFSE intermittent-pilot 30" Slope Glaze burner families.
The logs themselves do not have a standalone BTU input rating. Empire lists the referenced 30" vent-free Slope Glaze burner families at up to 38,000 BTU.
The supplied Empire brochure lists VFD42FB, VFP42FB, and VFS42FB.
The supplied burner information lists approximately 38" front width × 30" rear width × 14" depth × 20" height for the VFSM-30 in applicable non-Empire fireboxes.
The supplied burner information lists approximately 34" front width × 26" rear width × 14" depth × 20" height for these documented configurations.
No. Compatibility depends on the selected burner, fireplace dimensions, clearances, combustion-air provisions, installation configuration, and applicable codes.
No. Follow the manufacturer-prescribed placement for the approved log-and-burner combination because incorrect positioning can affect flame patterns and contribute to sooting.
Do not place extra logs, lava rock, debris, or other decorative material directly on the burner unless the manufacturer specifically approves that material and placement.
Yes. Vent-free burners use room air for combustion and require adequate combustion and ventilation air.
Yes. Empire's documentation identifies water vapor as a normal by-product of unvented gas combustion.
Yes. Do not allow fans or drafts to alter the intended flame pattern because flame impingement can contribute to improper combustion or soot formation.
Yes. Empire's burner documentation requires installation and service by a qualified installer, service agency, or gas supplier according to the manufacturer instructions and applicable codes.
The supplied brochure lists a five-year limited parts and labor warranty for vent-free parts, a three-year limited warranty for vented parts, and a one-year limited parts warranty for remote controls. Exact coverage depends on the component and installation.
Before You Order
Confirm Before Purchase
- You specifically need the Empire LS-30RSS.
- You want the seven-piece Super Sassafras configuration.
- You need a 30" refractory gas-log set.
- You have selected a compatible 30" Empire Slope Glaze burner.
- You have confirmed Natural Gas or Propane fuel.
- You have selected the desired control system.
- Your fireplace meets the dimensional requirements of the exact burner.
- You can meet all required combustible clearances.
- You can provide adequate combustion and ventilation air for vent-free operation.
- You understand that the burner and controls are sold separately.
- You will follow the approved log placement.
Do Not Assume
- That LS-30RSS and LS-30RS are the same product.
- That the burner is included.
- That every 30" burner is compatible.
- That the logs themselves determine fuel type.
- That the LS-30RSS itself produces 38,000 BTU.
- That all 30" Slope Glaze burners require identical firebox dimensions.
- That Natural Gas and Propane configurations are interchangeable.
- That vent-free installation is permitted everywhere.
- That the logs can be rearranged freely.
- That extra decorative media can be placed directly on the burner.
Description supplied by Flame Authority through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.