Skip to main content
StorkScout
EDIC® Vacuum and Solution Hose Assembly with Adapter Plate for Supernova and Polaris, 15 or 25 ft (1041AC, 2541AC)

EDIC® Vacuum and Solution Hose Assembly with Adapter Plate for Supernova and Polaris, 15 or 25 ft (1041AC, 2541AC)

Sold by OneUp Cleaning

$168.00

Price and availability requested live for this page. Final details are set by the seller.

Opens oneupcleaning.com in a new tab. The seller handles checkout, shipping, and returns.

StorkScout may earn money from Shopify when you buy through product links. Sponsored results are labeled, and compensation never determines the Weekly Edit. How we make money

Share

A closer fit

Find this, but…

Start with this listing, then change what matters. Matches come live from independent Shopify shops and are separate from StorkScout’s Weekly Edit.

Searches start with new, available products that ship to and from the U.S.

What would suit you better?

Try “folds for air travel” or “same shape, without plastic.”

About this product

EDIC 1041AC and 2541AC: Turn Your Supernova or Polaris Into a Portable Extractor


Your Supernova or Polaris cleans open carpet on its own, with the brush head doing the work. Then you reach the stairs, a row of upholstered chairs or the edge of a cubicle wall, and a self-contained head can't follow. This vacuum and solution hose assembly with adapter plate fixes that: plug it in, add a wand or upholstery tool, and the same machine cleans everything the head can't reach.

It comes in two lengths: the 15 ft 1041AC at $168, which EDIC lists as the Polaris accessory hose, and the 25 ft 2541AC at $203 for stairwells and long rooms. Each one has a 1-1/2 inch vacuum hose, a high-pressure solution line with brass quick disconnects, and the adapter plate that fits your machine's vacuum lid.

How the Adapter Plate Connects

EDIC's Polaris and Supernova manual describes a two-step switch from floor cleaning to hose work:

  • Vacuum side. Remove the machine's 2-inch hose adapter from the vacuum lid inlet and seat the adapter plate of this assembly in its place. The plate steps the opening down to the 1-1/2 inch hose that EDIC's wands and tools use.

  • Solution side. Pull back the sleeve on the machine's female quick disconnect and push in the solution line's male plug.

Clip your wand or tool onto the other end and you're ready for the stairs. Reverse the steps to go back to the floor head.

Which Wand or Tool to Pair With It

The Supernova runs an 85 psi pump and the Polaris a 120 psi pump, so pick the 100 to 250 PSI versions of EDIC's tools:

  • Carpet wand: the stainless Glidemaster 1034-110015FB dual jet or 1033-11003FB single jet, or the lightweight aluminum Triton TR1-95015FS-A.

  • Stairs: the stair and van wand, 10 inches wide and 30 inches long.

  • Powered cleaning: the Powermate brush wand, which EDIC lists as a Polaris accessory.

  • Upholstery: EDIC's 358AC upholstery kit ($378) has its own 15 ft hose, the 321ACH tool and a mesh bag, so you don't need this hose for upholstery. Already own this hose? Clip on the 321ACH tool ($262) on its own.

Skip the 500 PSI wand versions (1034-11001FB, TR1-9501FS-A). Their smaller tips put down too little water at 85 to 120 psi. Not sure what you have? Call (855) 601-5678 or message us your model number and we'll match the tools.

Which EDIC Hose Fits Your Machine?

Your EDIC machine Hose assembly Supernova 800 and 1200, Polaris 700, 800 and 1200 This page: 1041AC (15 ft) or 2541AC (25 ft) Galaxy 5, Galaxy 2000, Galaxy Pro, Endeavor 1040AC-HP, 2540AC-HP or 5040AC-HP (no adapter plate) Fivestar, Comet 341AC or 341AC-15

Care for the Hose

Flush the solution line with clean water after every job so chemical doesn't build up in the quick disconnects, and hang the hose in loose coils. Keep the 2-inch hose adapter you removed from the lid in a pocket of your cart; the machine needs it back for floor cleaning. If the vacuum hose kinks for good or a cuff tears, replace the assembly, because a leak on the vacuum side costs suction on every job.

EDIC 1041AC and 2541AC Specifications

EDIC® Supernova and Polaris Hose Assembly Specifications Brand EDIC Models 1041AC (15 ft), 2541AC (25 ft) Length 15 ft (4.6 m) or 25 ft (7.6 m) Vacuum Hose 1-1/2 in (38 mm), cuffs on both ends Solution Line High pressure, brass quick disconnects Machine Connection Adapter plate replaces the 2 in hose adapter on the vacuum lid inlet Fits EDIC Supernova 800PSN, 1200PSN; Polaris 701PS, 801PS, 1201PS Wand Not included Warranty EDIC replacement parts: 30 days

Own a portable Galaxy as well? It takes the Galaxy hose assembly, from $142, with no adapter plate.

Found a lower price? Call or message us and we'll beat it. Returns follow our return policy.

Add the length you need to your cart, or message us your machine's model number and we'll confirm the fit first.

Description supplied by OneUp Cleaning through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.