About this product
Riding an E-Ride Pro Mini? Get the E-Ride Pro Mini titanium full body kit (80 pcs).
The most complete titanium hardware kit for the E-Ride Pro on the market — covering virtually every visible bolt on the bike. Available for the 2.0, 3.0, and SR models.
- Most complete kits on the market since 2024
- 45% lighter than OEM steel — real weight savings across the entire bike
- Grade 5 6AL-4V certified — aerospace-grade titanium, greater strength-to-weight ratio than steel
- Rolled threads — enhanced fatigue resistance for long-term reliability
- 100% corrosion-proof — anodized & PVD coated in 8 colors
- Ships same day from Chicago — most orders depending on time of order
- Exclusively sold at Titanium Surron and authorized retailers only
- Use torque wrenches where applicable. More torque info found here.
2.0 Kits include:
- Peg pins
- Kickstand bolt/nut
- Rear axle nut
- Jackshaft nut (M10 older 2.0s, or M12 newer 2.0s)
- Motor mount bolts
- Peg bracket bolts
- Subframe bolts (custom head)
- Skid plate/bash guard bolts
- Sprocket bolts
- Chain/mud guard bolts
- Ignition cover bolts
- Brake caliper bolts (20mm x4)
- Front rotor bolts
- Rear rotor bolts
- Headlight bracket hardware
- Upper frame bolts near battery lid pins
- Controller bolts
- Handlebar to OEM neck (stem) bolts
- Handlebar brake handles and throttle
3.0 Kits include:
- Motor mount bolts (4 pcs)
- Peg bracket bolts (4 pcs)
- Skid plate/bash guard bolts (4 pcs M8 + 4 pcs M6)
- Subframe bolts (custom head) (4 pcs)
- Sprocket bolts (custom head) (5 pcs)
- Brake calipers (4 pcs)
- Along frame, below battery lid bolts (2 pcs)
- Bottom of battery tray (2 pcs)
- Chain/mud guard bolts (6 pcs)
- Headlight bracket hardware (2 pcs)
- Rear rotor bolts (6 pcs)
- Controller bolts (4 pcs)
- Ignition cover plate (2 pcs)
- Motor cover (2 pcs)
- Battery lid plastic side covers (2 pcs)
- Stem bolts (10 pcs)
- Brake handles (2 pcs 18mm — 2024 models) (4 pcs 15mm — 2025 models)
- Throttle (2 pcs)
- Front rotor (6 pcs)
- Rear axle nut (1)
- Battery lid bolts (2 pcs)
- Kickstand bolt/nut (1)
- Jackshaft nut (M12, 1)
SR Kits include:
- Motor mount bolts (4 pcs)
- Peg bracket bolts (4 pcs)
- Skid plate/bash guard bolts (4 pcs M8 + 4 pcs M6)
- Subframe bolts (custom head) (4 pcs)
- Sprocket bolts (custom head) (5 pcs)
- Brake calipers (4 pcs)
- Along frame, below battery lid bolts (2 pcs)
- Bottom of battery tray (2 pcs)
- Chain/mud guard bolts (6 pcs)
- Headlight bracket hardware (2 pcs)
- Rear rotor bolts (6 pcs)
- Controller bolts (4 pcs)
- Ignition cover plate (2 pcs)
- Motor cover (2 pcs)
- Battery lid plastic side covers (2 pcs)
- Stem bolts (10 pcs)
- Brake handles (2 pcs 18mm — 2024 models) (4 pcs 15mm — 2025 models)
- Regen throttle (1)
- Throttle (2 pcs)
- Front rotor (6 pcs)
- Rear axle nut (1)
- Battery lid bolts (2 pcs)
- Kickstand bolt/nut (1)
- Jackshaft nut (M12, 1)
Not included:
- Suspension linkage bolts (sold separately)
- Fork bolts (sold separately)
Kits are designed around OEM E-Ride Pro. Some aftermarket parts (seat riser, direct mount stem, peg drops, aftermarket brakes, etc.) may require additional hardware purchased separately.
E-Ride Pro complete kits
This E-Ride Pro body kit is also available bundled with a titanium fork bolt kit, matched to the fork on your bike: EXT Ferro, FastAce Gravitee, Fox 40 / Bomber 58, Tech E39, RFloXa Hawk 31 or Sirris F43. Linkage bolts are sold as the E-Ride Pro titanium linkage kit. See other bikes in titanium full-body bolt kits for e-moto.
Upgrading your forks too? Shop our titanium fork bolt kits.
Description supplied by Titanium Surron through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.
