About this product
Key Features
Overview
The Diablo D1050CF 10 in. x 50-Tooth Steel Demon Cermet II Saw Blade for Medium Metal is a 10 inch metal cutting saw blade built for dedicated low RPM saws. This is a circular saw blade designed for cutting medium metal and stainless steel with cooler operation, cleaner edges, and longer service life than grinding discs. Model Number: D1050CF.
What matters here is not just the 50-tooth count, but how the blade is built around metal work. Diablo uses Cermet II teeth, a ceramic-and-metal tooth design made to handle the heat and impact that come with cutting steel studs, angle iron, flat bar, threaded rod, conduit, channel, and stainless steel. It delivers up to 25 times longer life versus standard grinding discs, along with cuts that run cooler and faster. That means less time waiting on the cut, less heat dumped into the workpiece, and less time dressing rough edges after the fact.
The cutting geometry is set up for control. A triple chip grind helps leave burr-free edges while cutting with fewer sparks and less airborne debris than a grinding disc. Diablo also calls out an optimized blade design that reduces wandering and deflection, which matters when you are trying to stay on a line in thinner stock or avoid rework on repetitive cuts. The thin kerf further reduces resistance and heat buildup, so the saw does not have to work as hard pushing through steel.
On the build side, this blade has laser cut stabilizer vents to help control noise and vibration and keep the blade tracking straight. Tri-metal shock-resistant brazing helps the Cermet teeth stay attached under impact, which is a big deal in metal cutting where interrupted cuts and harder materials can beat up a lesser blade fast. The Perma-SHIELD coating is there to reduce friction, limit heat buildup, and fight corrosion, so the blade holds up better between jobs and in rough shop conditions.
Fitment is straightforward: the blade has a 10 inch diameter, a 1 inch arbor, and a maximum speed of 3,000 RPM. That makes it a purpose-built choice for dedicated low RPM metal cutting saws rather than a general wood blade you are trying to repurpose. If your saw matches that setup, you get a blade designed around metal cutting performance instead of compromise.
This blade makes the most sense for metal stud framers, electricians, HVAC installers, weld shops, fabricators, and contractors who regularly cut light to medium steel on site or in the shop. It is also a strong pick for serious DIY users working with steel tubing, rod, or flat stock who want cleaner results than abrasive cutting. If you need a metal cutting blade that runs cooler, lasts longer, and leaves a more usable edge right off the saw, this one is built for exactly that job.
Cleaner Cuts with Less Rework
This blade is built to do what abrasive wheels usually make messy: cut steel and stainless with a straighter path, less heat, and an edge that needs less cleanup.
- Triple chip grind helps produce smooth, burr-free cuts with fewer sparks.
- Laser cut stabilizer vents reduce vibration and help the blade stay accurate in metal cutting work.
- Thin kerf design lowers resistance and heat buildup for easier cutting in corded or cordless compatible low RPM saw platforms.
What's in the Box
- (1) Diablo D1050CF 10 in. x 50-Tooth Steel Demon Cermet II Saw Blade for Medium Metal
At a Glance
Key Specifications
Compatibility
Built For
Pro Tip
Run this blade only on a dedicated low RPM metal cutting saw and stay at or under the 3,000 RPM limit. That is how you get the cooler cuts, better edge quality, and tooth life this blade is designed to deliver.
Warranty & Support
Tool Nut's Take
Diablo D1050CF 10 in. x 50-Tooth Steel Demon Cermet II Saw Blade for Medium Metal is the right pick when you want metal cuts that look finished, not hacked off
This is a purpose-built metal cutting blade that gives you a cleaner edge, less heat, and a lot less nonsense than abrasive wheels.
- Who it's for: Contractors, fabricators, electricians, and HVAC crews cutting steel studs, conduit, threaded rod, angle iron, flat bar, and stainless on a regular basis.
- Why it stands out: The cermet tooth design, triple chip grind, stabilizer vents, and thin kerf all work together to cut cooler, straighter, and with less cleanup.
- Worth knowing: This is not a general-use blade. It belongs on a dedicated 10 inch low RPM metal cutting saw with a 1 inch arbor and a maximum speed of 3,000 RPM.
Common Questions
- What materials can this blade cut? It is designed to cut metal and stainless steel, including steel studs, angle iron, flat bar, threaded rod, conduit, and channel.
- What saw should this blade be used with? Use it with a dedicated 10 inch low RPM metal cutting saw.
- What arbor size does it use? This blade has a 1 inch arbor.
- What is the maximum rated speed? The maximum blade speed is 3,000 RPM.
Description supplied by Tool Nut through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.
