Diablo D0724DA 7-1/4 in. x 24-Tooth Demo Demon Ultimate Framing/Demolition Saw Blade

The Diablo D0724DA 7-1/4 in. x 24-Tooth Demo Demon Ultimate Framing/Demolition Saw Blade is a 7-1/4 inch circular saw blade built for hard-use wood cutting in framing, renovation, remodeling, and demolition work. This is a circular saw blade designed for framing and demolition cuts in wood, including nail-embedded material. Model Number: D0724DA. If your work regularly moves from fresh lumber to subfloors, roof tear-off, reclaimed stock, or jobsite wood with hidden fasteners, this blade is aimed right at that kind of abuse.

The 24-tooth layout gives you the right balance for fast feed rates and rough framing productivity without turning the blade into a throwaway consumable. Diablo calls out its TiCo+ high-density carbide with Dura-Blend for durability and tooth sharpness, along with Lock-Tooth technology and tri-metal shock-resistant brazing to help the carbide stay put under impact. In practical terms, that matters when the blade runs into embedded nails, screws, shingles, or other jobsite surprises that can chip or strip lesser teeth.

Diablo also built this blade around cutting efficiency, not just brute toughness. The optimized thin kerf measures .059 inch, paired with a .040 inch plate, which helps reduce drag as the blade moves through framing lumber, plywood, oriented strand board, and engineered lumber. Less drag means easier feed pressure for the user and less load on the saw. On cordless circular saws, that translates into more work per battery. On corded saws, it means a blade that does not feel like it is fighting the tool all day.

Where this blade separates itself from a basic framing blade is the grind package. Diablo uses an Axial Shear Face grind for better cutting efficiency and a three-tooth sequence combining chamfer, alternate top bevel, and Tracking Point. That is not just brochure language. The goal is better tracking control, smoother entry into the cut, and longer usable life in real materials that are dirty, abrasive, or inconsistent. When you are ripping out subfloor or cutting pressure-treated stock that is not exactly clean and straight, stable tracking matters.

Jobsite practicality is clearly part of the design. Perma-SHIELD non-stick coating helps resist heat, gumming, and corrosion, which is useful when resin, adhesive residue, or wet treated lumber would normally slow a blade down. Diablo also calls out an enhanced anti-vibration design and a laser-cut arbor to reduce vibration and premature wear. That means better cut control and less chatter, especially when the saw is being pushed through demolition cuts that are anything but ideal.

This blade is set up with a 5/8 inch arbor and a 13/16 inch diamond knockout, so it fits common circular saw setups used on residential framing and general construction jobs. Diablo specifically positions it for both cordless and corded circular saws, which makes sense given the focus on lower friction and efficient feed. Maximum rated speed is 8,000 RPM, so it is meant for full-size 7-1/4 inch saw applications, not specialty low-speed use.

As for materials, the official application list is broad and useful: demolition, shingles, pre-forming slab, 2x lumber, plywood, hardwoods, engineered lumber, pressure-treated wood, oriented strand board, and laminated beams. That makes this a good fit for framers, remodelers, roofers, general contractors, and serious DIY users who need one wood-cutting blade that can handle both clean stock and uglier tear-out work without swapping blades every hour.

If you mostly want finish-grade crosscuts in trim or cabinet material, a higher-tooth finish blade is still the better choice. But if your day is built around speed, abuse resistance, and dependable tracking in framing and demolition conditions, this blade makes more sense. It is a jobsite blade for people who know the cut will not always be clean, the wood will not always be new, and the saw still needs to keep moving.

Diameter 7-1/4 in. Tooth Count 24 PYR Arbor Size 5/8 in. Knockout 13/16 in. Diamond Kerf 0.059 in. Blade Material Carbide Hook Angle 15° Maximum Speed 8,000 RPM

One Blade for Framing Work That Gets Ugly Fast

The Diablo D0724DA 7-1/4 in. x 24-Tooth Demo Demon Ultimate Framing/Demolition Saw Blade makes a lot of sense for anyone who cuts more than clean new lumber and does not want to swap blades every time the job turns rough.

• Who it's for: Framers, remodelers, roofers, and contractors cutting subfloors, pressure-treated lumber, plywood, shingles, and wood that may hide fasteners.
• Why it stands out: The thin kerf keeps feed effort down, while the carbide, shock-resistant brazing, tracking-focused tooth design, and anti-vibration build are all aimed at real demolition abuse.
• Worth knowing: This is a production framing and demolition blade, not a fine-finish trim blade. If you want glass-smooth finish cuts, step up tooth count. If you want one that can take a beating, this is the better pick.

• What is this blade designed to cut? It is designed for wood cutting in framing and demolition work, including 2x lumber, plywood, hardwoods, engineered lumber, pressure-treated wood, oriented strand board, laminated beams, shingles, and demolition applications.
• Will it work on cordless circular saws? Yes. Diablo specifically states this blade is built for both cordless and corded circular saws, and the thin kerf design is intended to improve cutting efficiency.
• What arbor size does it use? It uses a 5/8 in. arbor and also includes a 13/16 in. diamond knockout.
• What is the maximum rated speed? Diablo lists a maximum speed of 8,000 RPM.