Diablo 7-1/4-in. x 60 ATB Ultra Finish Saw Blade (D0760X)

The Diablo D0760X 7-1/4 in. x 60 ATB Ultra Finish Saw Blade is a 7-1/4 inch circular saw blade made for high-quality finish crosscuts in wood-based sheet goods and trim materials. This is a circular saw blade designed for ultra-finish cutting in plywood, melamine, delicate hardwoods, and molding. Model Number: D0760X. With a 60-tooth alternate top bevel tooth pattern, 5/8 inch arbor, and ultra thin kerf, it is aimed at users who want cleaner visible cuts from a handheld circular saw instead of a rough framing-style finish.

Where this blade matters most is on material that likes to chip. Diablo built this one for crosscutting applications, and the tooth count plus ATB grind back that up. If you are cutting veneer plywood, shelving panels, melamine, oak, pine, or finish boards, the extra teeth help leave a smoother edge with less tear-out than a general-purpose blade. The manufacturer also rates it for stock up to 1-1/2 inches thick, which puts it right in the sweet spot for cabinet parts, trim work, shelving, and clean jobsite finish cuts.

The ultra thin kerf is not just a spec for the box. It means the blade removes less material on each pass, so the cut takes less effort and creates less waste. On a corded saw, that helps the saw move easier through dense sheet goods. On a cordless saw, it can also make the tool feel less bogged down in finish material. When you are trying to keep a cut line straight on a long rip through plywood or a crosscut on prefinished stock, less drag is a real benefit.

Diablo also put real thought into the blade body. The laser-cut steel plate is designed for smooth running and flatness, and the anti-vibration design helps keep noise down while supporting a steadier cut. That matters because finish work is unforgiving. A blade that chatters, deflects, or runs hot can leave a rough edge fast. The hardened steel body, blade pretensioning, and shock-resistant brazing are all there to keep the carbide tips working longer and to help the blade stay stable when it hits the harder spots in plywood, hardwood, or laminated material.

The carbide itself is another big part of the story. Diablo uses TiCo Hi-Density carbide for this blade, and that is important because finish blades live or die by edge quality. A sharper, longer-lasting tooth means more consistent cut quality over time, not just on the first few cuts. Add in the Perma-SHIELD non-stick coating and you get less friction, less heat buildup, and better resistance to gumming and corrosion. In practical terms, that helps the blade stay cleaner and keep cutting smoothly when you are working through resinous woods or sheet goods.

For fitment, this blade is made for 7-1/4 inch circular saws using a 5/8 inch arbor, and it also includes a 13/16 inch diamond knockout noted on the blade. It is compatible with circular saws and is marked for both corded and cordless use. Max rated speed is 8,000 RPM, so it is intended for standard handheld circular saw applications, not specialty high-speed setups outside that limit. If your saw matches the blade diameter, arbor requirement, and speed rating, this is a straightforward upgrade from a rough-cut blade.

This blade makes the most sense for finish carpenters, remodelers, cabinet installers, punch-list crews, and serious DIY users who care what the cut edge looks like. It is also a smart choice for anyone breaking down plywood for built-ins, shelving, closet systems, or furniture parts with a circular saw. If your work is mostly rough framing, you probably do not need a 60-tooth finish blade every day. But if clean edges save you sanding, reduce chip-out, and keep prefinished surfaces looking right, this is exactly the kind of blade you want on hand.

Blade Diameter 7-1/4 in. Tooth Count 60 Arbor Size 5/8 in. Knockout Type 13/16 in. diamond Tooth Grind Alternate Top Bevel (ATB) Kerf 0.059 in. Blade Material Carbide Weight 0.47 lbs Max Speed 8,000 RPM Recommended Stock Thickness Up to 1-1/2 in. Compatible Tool Type Circular Saw Made In Italy

Diablo D0760X 7-1/4 in. x 60 ATB Ultra Finish Saw Blade for Cleaner Jobsite Finish Work

This is the blade you grab when the cut edge actually matters and a basic framing blade is not going to cut it clean enough.

• Who it's for: Finish carpenters, remodelers, cabinet installers, and DIY users cutting plywood, melamine, shelving, trim, and hardwood with a circular saw.
• Why it stands out: The 60-tooth ATB layout, thin kerf, anti-vibration body, and TiCo carbide all point toward one thing: cleaner crosscuts with less chip-out and less cleanup after the cut.
• Worth knowing: This is a finish blade, not your all-day framing blade. It shines on material up to 1-1/2 inches thick and on cuts where surface quality matters more than fast rough production.

• What kind of saw does this blade fit? It is designed for 7-1/4 inch circular saws with a 5/8 inch arbor, and it includes a 13/16 inch diamond knockout.
• What materials is this blade best for? It is made for finish crosscuts in wood and engineered wood materials such as oak, pine, melamine, veneer plywood, delicate molding, and similar sheet goods.
• Is this blade better for ripping or crosscutting? Crosscutting. The 60-tooth ATB design is specifically intended for clean finish cuts rather than rough framing or aggressive rip cuts.
• Can it be used on cordless circular saws? Yes. The blade marking indicates use with corded or cordless circular saws, as long as the saw matches the blade size, arbor, and maximum 8,000 RPM rating.