DeWalt Circular Saw Blade DW3112 10 Inch Fast Ripping (24 Tooth ATB Carbide 5/8 Inch Arbor 7000 RPM Hardwood Plywood Table Saw Shearing)

DeWalt DW3112 10-Inch 24-Tooth Fast Ripping Table Saw Blade

The DeWalt DW3112 10-Inch 24-Tooth Fast Ripping Table Saw Blade is an industrial woodworking accessory engineered for high-speed linear ripping through hardwoods, softwoods, dimensional framing lumber, and plywood panels. Featuring submicron-grade carbide teeth in an Alternate Top Bevel (ATB) pattern with a 15-degree positive hook angle, this 5/8-inch arbor blade operates at speeds up to 7,000 RPM and achieves a maximum cut depth of 4-1/2 inches. Built with a 0.095-inch ultra-thin kerf, a wedge shoulder steel backing reinforcement, and an anti-friction non-stick thermal coating, this computer-balanced blade reduces motor resistance and vibration on jobsite table saws and miter saws.

Best Used For:

• Hardwood & Softwood Longitudinal Ripping: Executing rapid parallel cuts along the grain of oak, maple, pine, and pressure-treated framing lumber.
• Dimensional Framing Timber Sizing: Slicing 2X framing stock, deck joists, and structural wall studs quickly with reduced feed resistance.
• Plywood & Subfloor Sheet Ripping: Sizing thick exterior plywood sheets and OSB subflooring panels on jobsite table saw stations.

Key Performance & Safety Features

• Submicron-Grade Carbide Teeth: High-density carbide tips resist impact and abrasive wear to maintain sharp cutting edges during high-volume production cuts.
• 24-Tooth ATB & 15-Degree Hook Angle: Aggressive rake geometry and tooth count clear wood chips rapidly for continuous fast-feed ripping.
• Wedge Shoulder Tooth Reinforcement: Extends steel plate backing behind each carbide tip to absorb lateral shock and prevent tooth shear.
• 0.095-Inch Ultra-Thin Kerf Design: Minimizes material engagement drag to preserve saw motor power and increase feed speed.
• Computer-Balanced Steel Plate: Precision-balanced 0.070-inch core plate dampens operation vibration for straight cut tracking and reduced chatter.
• Heat-Resistant Anti-Friction Coating: Non-stick thermal barrier shields the blade against resin gumming, pitch buildup, and surface corrosion.

What's Included

• (1) DeWalt DW3112 10-Inch x 24-Tooth Fast Ripping Table Saw Blade

Technical Specifications

Brand / Manufacturer DeWalt Model / Part Number DW3112 Blade Diameter Metric / Imperial 10.0 in. (254.0 mm) Tooth Count & Application 24 Teeth / Fast Ripping Tooth Grind Geometry Alternate Top Bevel (ATB) Rake / Hook Angle Geometry 15° Positive Hook Angle Tooth Tip Material Composition Submicron-Grade Tungsten Carbide Arbor Shaft Hole Size 0.625 in. (15.875 mm / 5/8 in. Round) Kerf Cutting Width Gauge 0.095 in. (2.41 mm) Steel Plate Thickness Gauge 0.070 in. (1.78 mm) Maximum Rotational Speed 7,000 RPM Maximum Cut Depth Capacity 4.5 in. (114.3 mm / 4-1/2 in.) Machine Tool Compatibility 10-Inch Table Saws, Miter Saws & Radial Arm Saws

Pro-Tip: Use a splitter or riving knife aligned precisely with the 0.095-inch kerf when ripping resinous softwoods; keeping internal board stress from pinching the rear teeth prevents kickback and maintains fast feed velocity.