About this product
Legend Deluxe V-Nose Aluminum Enclosed Cargo Trailer — Rust-Free All-Aluminum Construction for Contractors & Haulers
The Legend Deluxe V-Nose (DVN) is an all-aluminum enclosed cargo trailer built on a rust-free aluminum tube frame in Alma, Michigan, available in single and tandem axle configurations across a wide range of sizes. Designed for contractors, motorsports haulers, and landscapers who demand long-term durability, this model features a polished radius top, polished accent divider strip, a deluxe fixed step at the side entry door, black locking hasps on the rear self-mating ramp door, and mesa skirting along the exterior. The DVN is offered in flat front (LD), 3' V-Nose in 6' or 7' wide (DVN), 8' wide (DVN8), and Deluxe Snow 8' wide (DS) configurations. Backed by the industry-leading Legend warranty, this trailer is the brand's #1 selling model year after year.
Technical Specifications
General Configuration
Specification Details Available Axle Configuration Single & Tandem Single Axle Standard Sizes 6x13, 6x15, 7x15 Tandem Axle Standard Sizes 6x15, 7x15, 7x17, 7x19, 7x21, 7x23 G.V.W.R. — Single Axle 2,990# G.V.W.R. — Tandem Axle 7,000# – 8,500# Common Uses General Cargo, ATV/UTV, Powersports, Lawn & Landscape, ConstructionSingle Axle Dimensional Specs
Model 6×13 6×15 7×15 Overall Length 194″ 218″ 218″ Overall Width 95″ 95″ 102″ Overall Height 101″ 101″ 101″ Interior Box Length + V 10'+3′ 12'+3′ 12'+3′ Interior Box Width 69″ 69″ 79″ Interior Height 78″ 78″ 78″ Rear Door Type Ramp Door Ramp Door Ramp Door Rear Door Height 73″ 73″ 73″ Rear Door Width 61″ 61″ 71″Single Axle Running Gear
Specification Details Axle Type EZ-Lube Torsion Axle Size 3,500# Brakes 1 Idler Tire Size ST205/75R15 Wheels Gunmetal or Black AluminumSingle Axle Frame & Structure
Specification Details Cross Members Size 2″ x 3″ Tube Cross Member Spacing 24″ OC Frame 2″ x 4″ Perimeter Tube Roof Bow Size 1″ x 1″ Radius Tube Roof Bow Spacing 24″ OC w/ Stringers Roof Profile Radius Roof Roof Type One Piece All Aluminum Wall Stud Size 1″ x 1.5″ Tube Wall Stud Spacing 16″ OCSingle Axle Interior & Exterior Finish
Specification Details Floor 3/4″ Engineered Wood Panel Interior Walls 3/8″ Engineered Wood Panel Ceilings Optional Finishes Exterior Skin Bonded, Screwless, .030 Alum., Divider Strip w/ DecalSingle Axle Electrical
Specification Details Dome Lights 2 – 12v Rectangle LED Domes w/ Wall Switch Exterior Lighting Type Surface Mount LEDSingle Axle Hardware & Accessories
Specification Details Coupler 2″ Straight Jack 2,000# Top-Wind Fenders ATP Fender Side Door 30″ Curbside RV w/ Flush Lock & Alum. Holdback Storage Optional Tie Downs 4 – 1,000# D-Rings (Installed) Vents 2 – Plastic Side Air VentsTandem Axle Dimensional Specs
Model 6×15 7×15 7×17 7×19 7×21 7×23 Overall Length 218″ 218″ 242″ 266″ 290″ 314″ Overall Width 95″ 102″ 102″ 102″ 102″ 102″ Overall Height 101″ 101″ 101″ 101″ 101″ 101″ Interior Box Length + V 12'+3′ 12'+3′ 14'+3′ 16'+3′ 18'+3′ 20'+3′ Interior Box Width 69″ 79″ 79″ 79″ 79″ 79″ Interior Height 78″ 78″ 78″ 78″ 78″ 78″ Rear Door Type Ramp Door Ramp Door Ramp Door Ramp Door Ramp Door Ramp Door Rear Door Height 73″ 73″ 73″ 73″ 73″ 73″ Rear Door Width 61″ 71″ 71″ 71″ 71″ 71″Tandem Axle Running Gear
Specification Details Axle Type E-Z Lube Torsion Axle Size 3,500# Brakes 2 Electric Brakes Tire Size ST205/75R15 Wheels Gunmetal or Black AluminumTandem Axle Frame & Structure
Specification Details Cross Members Size 2″ x 3″ Tube Cross Member Spacing 24″ OC Frame 2″ x 4″ Perimeter Tube Roof Bow Size 1″ x 1″ Radius Tube Roof Bow Spacing 24″ OC w/ Stringers Roof Profile Radius Roof Roof Type One Piece All Aluminum Wall Stud Size 1″ x 1.5″ Tube Wall Stud Spacing 16″ OCTandem Axle Interior & Exterior Finish
Specification Details Floor 3/4″ Engineered Wood Panel Interior Walls 3/8″ Engineered Wood Panel Ceilings Optional Finishes Exterior Skin Bonded, Screwless, .030 Alum., Divider Strip w/ DecalTandem Axle Electrical
Specification Details Dome Lights 2 – 12v Rectangle LED Domes w/ Wall Switch Exterior Lighting Type Surface Mount LEDTandem Axle Hardware & Accessories
Specification Details Coupler 2 5/16″ Straight Jack 2,000# Top-Wind Fenders ATP Fender Side Door 30″ Curbside RV w/ Flush Lock & Alum. Holdback Storage Optional Tie Downs 4 – 1,000# D-Rings (Installed) Vents 2 – Plastic Side Air VentsWarranty Coverage
Coverage Area Term Structural Warranty (Legend Premium Enclosed) 10 Years Aluminum Roof Warranty 25 Years Commercial Use Warranty 1 Year Rental Unit / Dealer Demo 90 Days from original retail purchaseThe Legend DVN stands apart from steel-framed competitors by using an all-aluminum tube frame that eliminates rust at the structural level — a critical advantage for trailers exposed to road salt, moisture, and outdoor storage year-round. The screwless, bonded .030 aluminum exterior skin and one-piece aluminum radius roof further reduce long-term maintenance demands compared to riveted or painted steel alternatives. The 10-year structural and 25-year aluminum roof warranty reflects the manufacturer's confidence in the build quality and gives contractors a long-term asset rather than a consumable.
Key Features & Benefits
Rust-Free All-Aluminum Tube Frame
Built on a 2″ x 4″ perimeter aluminum tube frame with 2″ x 3″ cross members spaced 24″ OC, the DVN's structure will not rust — a direct advantage over steel-framed trailers in high-moisture or road-salt environments. For contractors who store equipment outdoors or operate in northern climates, this translates to a longer service life and lower long-term cost of ownership.
Screwless Bonded Exterior Skin
The .030 aluminum exterior skin is bonded rather than screwed, eliminating exposed fastener points that can loosen, corrode, or allow water infiltration over time. The polished accent divider strip and decal deliver a professional appearance that holds up through daily jobsite use.
One-Piece All-Aluminum Radius Roof
The one-piece aluminum radius roof with 1″ x 1″ roof bows spaced 24″ OC with stringers provides a seamless, leak-resistant overhead structure. Legend backs this roof with a 25-year warranty against corrosion and deterioration — the longest coverage period in the warranty matrix.
EZ-Lube Torsion Axles
Both single and tandem configurations use EZ-Lube torsion axles rated at 3,500# each, simplifying routine bearing maintenance and providing independent wheel suspension for a smoother ride over uneven terrain. Tandem axle models include 2 electric brakes for added stopping control under load.
16″ OC Wall Stud Spacing
Wall studs are spaced at 16″ OC — tighter than many competing trailers — providing a stiffer sidewall structure that better resists racking and impact from shifting cargo. This spacing also gives contractors more anchor points when mounting interior shelving, racks, or equipment.
4 Installed 1,000# D-Ring Tie Downs
Four 1,000# D-rings come installed from the factory, allowing contractors to immediately secure loads without purchasing and installing aftermarket tie-down hardware. Combined with the 3/4″ engineered wood floor panel, the cargo area is ready for heavy equipment and tools from day one.
LED Lighting Package
Two 12v rectangle LED dome lights with a wall switch provide interior illumination for loading and unloading in low-light conditions, while surface-mount LED exterior lighting ensures road visibility and compliance. LED fixtures draw less power and have a longer service life than incandescent alternatives.
Common Applications
General Cargo Hauling
The enclosed aluminum body protects tools, materials, and equipment from weather and theft during transport between jobsites. Available in sizes from 6x13 up to 7x23, the DVN scales to match the volume requirements of individual tradespeople or larger crews.
ATV / UTV Transport
The rear ramp door — up to 71″ wide on 7′ models — and 78″ interior height accommodate side-by-side UTVs and ATVs for motorsports hauling or jobsite utility vehicle transport. The 4 installed D-rings provide immediate tie-down points for securing powersports equipment.
Powersports Hauling
The DVN's clean interior with 3/8″ engineered wood panel walls and optional ceiling finishes makes it suitable for hauling motorcycles, snowmobiles, or other powersports equipment where interior protection matters.
Lawn & Landscape Operations
Landscaping contractors can load mowers, blowers, trimmers, and hand tools through the rear ramp door and secure them with the installed D-rings. The enclosed body keeps equipment dry and reduces theft risk at unattended job locations.
Construction & Trades Use
The DVN serves as a mobile tool and material storage unit for construction trades, with the 30″ curbside RV side door providing quick access without opening the full rear ramp. The 3/4″ engineered wood floor handles the weight of heavy tools and building materials.
Compatible Materials
- General cargo and packaged goods
- ATVs and UTVs
- Motorcycles and powersports equipment
- Lawn and landscape equipment (mowers, trimmers, blowers)
- Construction tools and materials
- Snowmobiles (Deluxe Snow DS configuration available)
Product Documents
- Deluxe V-Nose | Single Axle | Product Guide PDF
- Deluxe V-Nose | Tandem Axle | Product Guide PDF
- Warranty Info
Frequently Asked Questions
Q: What is the difference between the single axle and tandem axle configurations?
A: Single axle models (6x13, 6x15, 7x15) have a G.V.W.R. of 2,990# and use 1 idler brake, while tandem axle models (6x15 through 7x23) have a G.V.W.R. of 7,000#–8,500# and include 2 electric brakes. Tandem axle models also use a 2 5/16″ coupler versus the 2″ straight coupler on single axle units.
Q: Is the warranty transferable to a new owner?
A: No. The Legend Limited Warranty is not transferable and applies only to the original retail purchaser.
Q: What must I do to validate the warranty?
A: The purchaser must complete, sign, and return the warranty registration card to Legend Manufacturing, Inc. within 15 days of the original purchase date. Failure to do so voids all express warranties except as prohibited by law.
Q: Are components like tires, axles, and lights covered under the Legend warranty?
A: No. Tires, axles, brake components, lights, electrical fixtures, engineered wood flooring, couplers, jacks, and doors are warranted by their respective manufacturers and are excluded from the Legend Limited Warranty.
Q: Can I have warranty repairs performed at any shop?
A: Repairs must have prior written consent from Legend Manufacturing, Inc. before work is performed. Under some circumstances, offsite repair at a facility deemed acceptable by Legend may be arranged, but reimbursement will not be made for unauthorized repairs.
Q: Is a blackout appearance package available?
A: Yes. For buyers who prefer a less polished chrome look, a blackout package is available as an alternative to the standard polished radius top and accent trim.
Description supplied by Diamond Tool Store through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.






