Crescent Paddle Bit Set CDSPSET-16 16 Piece (1/4 Hex Shank Impact Rated Screw Point Self Feeding Wood Drill 15X Faster 6 Inch Length)

Crescent CDSPSET-16 16-Piece Impact-Rated Screw Point Paddle Bit Set

The Crescent CDSPSET-16 16-Piece Screw Point Paddle Bit Set is a high-speed wood boring accessory kit engineered for rapid wire clearance, plumbing pipe passage, and structural framing penetration. Manufactured from triple-sharpened high-speed steel with self-feeding threaded screw point tips, these 6-inch bits drill up to 15 times faster than standard spade bits across clean timber and nail-embedded lumber. Equipped with reinforced cutting spur edges, contoured chip-removal paddles, an optimized impact torsion zone, and a universal 1/4-inch quick-release hex shank, this 2-55/100 pound set includes bit sizes ranging from 1/4 inch to 1-1/4 inches organized inside a heavy-duty storage pouch.

Best Used For:

• Electrical Rough-In Wire Routing: Boring rapid clean passage holes through 2x framing studs to pull NM-B Romex building wire.
• Plumbing Supply Pipe Bore Holes: Drilling larger 1-inch and 1-1/4-inch diameter holes through joists and sole plates for PEX and copper water lines.
• Remodeling & Nail-Embedded Timber Drilling: Slicing aggressively through old-growth framing and hidden framing nails without shearing cutting spurs.

Key Performance & Safety Features

• Self-Feeding Threaded Screw Point Tip: Draws the drill bit into the workpiece automatically to reduce feed pressure and operator fatigue.
• Triple-Sharpened High-Speed Steel Construction: Delivers up to 15X faster drilling velocity compared to conventional flat spade bits.
• Impact-Rated Shank with Torsion Zone: Flexes under high peak torque to absorb shock loads inside 1/4-inch impact drivers.
• Reinforced Nail-Cutting Spurs: Hardened cutting edges slice through embedded framing nails without dulling or chipping the blade profile.
• Contoured Chip-Ejection Paddle Design: Clears wood shavings rapidly out of the bore hole to prevent clogging during deep 6-inch cuts.
• 1/4-Inch Quick-Release Hex Shank Interface: Provides universal fitment and fast bit swaps across all 1/4-inch hex impact drivers and drill chucks.

What's Included

• (12) 6-Inch Screw Point Paddle Bits (Sizes: 1/4 In., 5/16 In., 3/8 In., 7/16 In., 1/2 In., 9/16 In., 5/8 In., 3/4 In., 7/8 In., 1 In., 1-1/8 In., 1-1/4 In.)
• (3) Modular Bit Holder Accessories
• (1) Heavy-Duty Fabric Storage Pouch

Technical Specifications

Brand / Manufacturer Crescent Model / Part Number CDSPSET-16 Total Set Piece Count 16 Pieces Drill Bit Tip Style Self-Feeding Threaded Screw Point Shank Drive Interface Size 1/4 in. Quick-Release Hex Shank Shank Impact Rating Impact Rated with Integrated Torsion Zone Maximum Drilling Depth / Bit Length 6 in. (152.4 mm) Overall Length Bit Diameter Size Range 1/4 in. to 1-1/4 in. Material Cutting Compatibility Framing Lumber, Plywood, OSB, Nail-Embedded Wood Included Storage Case Heavy-Duty Fabric Pouch Total Packaged Weight 2-55/100 lbs (2.557 lbs / 1.16 kg)

Pro-Tip: Allow the self-feeding threaded screw tip to pull the bit through the wood framing naturally without pushing hard on the impact driver; letting the thread pitch do the work prevents bit stall and preserves battery life.