About this product
Magswitch heavy-lifting cordless electric (CE) Magnetic Lifters are the new generation of SPM battery magnets.
Lifting Device Features
- Automatic on/off actuation when landing and placing the workpiece in AUTO mode.
- Perfect for maneuvering larger cutouts from the burn table, as well as small sheets.
- Capable of being used as a positioning/holding tool, for grinding or fixturing small pieces together.
- Automatic on/off actuation when landing and placing the workpiece in AUTO mode.
- 3:1 safety factor.
- Fails safe – no power required once actuated.
- Up to 1000 operation cycles before recharging 2h by the power supply of 110V / 230V.
- Variable Flux Output (VFO) for de-stacking (1/4in min).
- On tool button
IMPORTANT note ASME B30.20 standards take precedence over all data provided. We strongly advise operators to be familiar with this standard prior to using any underhook lifter.
Specifications
- Maximum Breakaway Force 1,2: 33070lb / 15000kg
- Breakaway Force @ SWL 3:1: 11023lb / 5000kg
- Minimum Thickness for De-Stacking3 – VFO capable: Level 1: 1/4in / 6mm, Level 2: 5/16in / 8mm, Level 3: 13/32in / 10mm
- Charging Supply Voltage: 110V/230V
- Charging Time: 8 hours
- Number of Cycles per Charge: 300
- Net Weight: 1146lb / 520kg
- Mounting Option: Single Hoist Ring
- Hold Surface (L x W): 24.5in x 11.4in
- Max Temp 176° Fahrenheit (80° Celsius)
- Dimensions (L x W x H): 29in x 16in x 12.5in
Determined in a laboratory environment on SAE1018 Steel with a surface roughness of 63 micro inches with optimized pole shoes. Many factors contribute to the actual breakaway force and safe working load in each application. Consult a Magswitch Applications Engineer and test the Magswitch in each application before deployment.All data applies to units with standard combination V/flat pole shoes installed.Determined with SAE1018 Steel L=200mm W=200mm.Maximum forces listed above are not safe lifting forces. Designers must take into account safety factors when specifying tools. Magswitch recommends SWL = 3:1 for most lifting applications.
CE 11000 Air gap <0.1mm Air gap 0.1 to 0.3mm Air gap 0.3 to 0.5mm Material Thickness(mm [in]) Max. Load
(kg [lbs]) Max. Load
(kg [lbs]) Max. Load
(kg [lbs]) 4 [0.157] 365 [804] 325 [716] 290 [639] 6 [0.236] 690 [1521] 670 [1477] 640 [1410] 10 [0.393] 1465 [3229] 1435 [3163] 1375 [3031] 13 [0.511] 2095 [4618] 2035 [4486] 1930 [4254] 19 [0.748] 3300 [7275] 3170 [6988] 2945 [6492] 25 [0.984] 4250 [9369] 4075 [8983] 3720 [8201] 38 [1.496] 4715 [10394] 4470 [9854] 3990 [8796] 50 [1.968] 5000 [11023] 4735 [10438] 4265 [9402]
Downloads
CE 11000 Magnetic Lifter Downloads:
Magswitch Downloads:
Description supplied by Magswitch Technologies through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.
