About this product
The Comstock-Castle CCHG-24T-1 is a 24 inch wide countertop gas griddle from the CCHG Series, built in Quincy, Illinois around stainless steel U shaped burners and a 1 inch high polish cold rolled steel plate with a 22.5 inch cook depth. It runs two U burners at 30,000 BTU each, one per 12 inch section, for 60,000 BTU total, and ships set up for natural gas or propane as you specify.
U shaped burners spread flame across the whole section instead of a single line down the middle, so the plate heats evenly front to back. With 30,000 BTU per foot this is a high-output griddle for lines that keep the surface loaded through service.
1 Inch Cold Rolled Steel Plate, 24 x 22.5 Inches
The plate is 1 inch high polish cold rolled steel, 24 inches wide by 22.5 inches deep, with the seams welded to prevent gap seepage. A 3 inch grease trough across the front drains into a high capacity stainless steel grease drawer.
Thermostat Control Every 12 Inches, 200 to 450 Degrees F
Thermostat control every 12 inches, adjustable from 200 to 450 degrees F, so each section holds its own set temperature. Brass gas valves with front accessible automatic standing pilots and pressure regulators. Optimal pressure is 5 inch WC on natural gas and 10 inch WC on propane, with a 3/4 inch manifold connection.
Double Wall Stainless Steel Body on 4 Inch Adjustable Legs
Corrosion resistant stainless steel with double wall construction, a 3.25 inch bull nose landing across the front for control protection, and 4 inch tall adjustable legs. The unit is 30 inches deep and 16.5 inches high. ETL design and ETL Sanitation (ANSI-NSF 4) certified.
Description supplied by TheChefStore.Com through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.
