About this product
Product Description
The CARRIER HC30CQ460 is a draft inducer motor rated at 1/16 horsepower and designed for operation at 400/460 volts. Inducer motors drive the combustion air blower assembly in gas furnaces, pulling flue gases through the heat exchanger and exhausting them safely out of the system before and during each burner cycle. This motor is an OEM-style replacement component intended for installation by licensed HVAC technicians servicing Carrier furnace equipment. It is a critical safety-related component, as proper inducer operation is required for pressure switch proving and safe ignition sequencing.
This inducer motor is intended for use in residential and light-commercial gas furnace applications where the original Carrier inducer assembly requires motor replacement. The 400/460-volt rating makes it suitable for systems wired at standard residential and commercial supply voltages. Technicians typically encounter this replacement need when diagnosing induced-draft failures, pressure switch faults, or noisy bearing conditions in the inducer housing. Install according to the original equipment configuration and verify pressure switch function after replacement.
Key Features
- Rated at 1/16 HP for inducer blower duty in gas furnace applications
- 400/460-volt operating voltage suits standard residential and commercial supply
- OEM-style replacement designed to match original Carrier inducer motor specifications
- New condition - not remanufactured or rebuilt
- Supports safe combustion sequencing by driving flue gas exhaust before ignition
Compatibility
Designed as an OEM-style replacement inducer motor for Carrier gas furnace systems. Confirm fitment against the original equipment model number and motor specifications before installation.
Installation Notes
Inducer motor replacement should be performed by a licensed HVAC technician. Shut off all electrical power to the furnace at the disconnect and confirm power is off with a meter before beginning disassembly. After installing the replacement motor, verify that the inducer assembly is properly sealed to the heat exchanger flue collar and confirm pressure switch operation before returning the system to service. Work must comply with applicable local mechanical and electrical codes.
Technical Specifications
- Horsepower: 1/16 HP
- Voltage: 400/460 volts
- Condition: New
Standard Information
- Brand: CARRIER
- Manufacturer Part Number: HC30CQ460
Description supplied by Voomi Supply through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.
