About this product
Product Description
The CARRIER 08-2835-15 is a thermal limit switch, also known as a snap disc thermostat, used in gas furnace and air handler applications to protect the heat exchanger and surrounding components from overtemperature conditions. Manufactured by Therm-O-Disc (T-O-D) under model code 75TF014, it opens the circuit at a cut-out temperature of 145 degrees F and resets after the temperature drops by 45 degrees F, giving a reset point near 100 degrees F. The switch carries a maximum temperature rating of 180 degrees F and is rated for 240VAC at 50/60 Hz. Licensed HVAC technicians install this part during routine maintenance and emergency service calls.
This limit switch is designed for residential and light commercial heating equipment. It mounts in the furnace heat exchanger vestibule area and is wired in series with the burner or blower control circuit. When airflow is restricted or a component failure causes excessive heat buildup, the switch opens to shut down the burner, preventing heat exchanger damage. The compact form factor, measuring 1.56 inches in length, 1 inch in width, and 1.25 inches in height, suits tight mounting locations common in modern furnace cabinets.
Key Features
- Snap disc thermal limit action with a cut-out temperature of 145 degrees F
- 45 degrees F differential for automatic reset after cool-down
- Maximum rated temperature of 180 degrees F for high-heat protection
- Rated for 240VAC operation at 50/60 Hz
- Compact footprint: 1.56 x 1 x 1.25 inches, weighing 1 pound
- Manufactured by Therm-O-Disc (T-O-D), a recognized OEM supplier for HVAC limit controls
Compatibility
Designed as an OEM-style replacement thermal limit switch for Carrier residential gas furnace and air handler applications requiring a 145 degrees F cut-out snap disc thermostat.
Installation Notes
Installation must be performed by a qualified HVAC technician. Always shut off power to the furnace at the disconnect switch and confirm voltage is absent before removing or installing the limit switch. The switch is wired in series in the low-voltage or line-voltage control circuit depending on the furnace design; refer to the unit wiring diagram before making connections. Do not operate the furnace without first confirming the new switch is properly seated and all fasteners are secure.
Technical Specifications
- Product Type: Thermal Limit Switch / Snap Disc Thermostat
- Manufacturer: Therm-O-Disc (T-O-D)
- Model Code: 75TF014
- Therm-O-Disc Part Number: 307305
- Temperature Rating: L145-45F
- Cut-Out Temperature: 145 degrees F
- Differential: 45 degrees F
- Maximum Temperature Rating: 180 degrees F
- Voltage Rating: 240VAC (application dependent)
- Frequency: 50/60 Hz
- Length: 1.56 inches
- Width: 1 inch
- Height: 1.25 inches
- Weight: 1 pound
Standard Information
- Brand: CARRIER
- Manufacturer Part Number: 08-2835-15
Description supplied by Voomi Supply through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.
