Carbide Tipped Annular Cutter with One-Touch Shank CBN Ground, ANSI Standard, Cutting Depth: 1" or 2"

Carbide Tipped Annular Cutter with One-Touch Shank CBN Ground, ANSI Standard, Cutting Depth: 1" or 2"

• ISO9001
• Carbide Tipped Annular Cutters with ONE-Touch Shank
• CBN ground
• ANSI Standard
• Cuts holes in steel accurately, quickly & safely
• Large holes can be drilled up to ten times faster than regular drills bits
• Make overlapping holes, slotting holes and edge cuts
• Machine-finish hole-no reaming needed when used with Lubricant
• American Standard
• Carbide tipped for long life and quick, efficient and fast cutting through rust and corrosion.
• Center-free design creates through holes by cutting only the periphery of the hole for greater productivity in comparison to twist drills; it Cut clean, bur free hols.
• Precision pilot pins eject the center as a plug of steel.
• Can use on abrasive and tough-to-cut materials
• More cutting teeth to distribute the load evenly so that increase tool life and achieve faster feed rates Maximize cutting performance of any portable magnetic drill press.
• Feature a length flute to pull chips out when deep in the hole
• Carbide tipped cutting edges can be run at a higher speed than HSS, making increased wear resistance and suitability for higher cutting temperatures.
• Produces little slag and few chips for easy disposal. this tool geometry maintains better chip flow
• 3/4" Weldon shank flats for fast loading and better rigidity which suitable for most Magnetic drills or can be used in a drill press, mill, or lathe.
• And this combined Nitto shank which and the one-touch replacement system for Jetbroach carbide-tipped annular hole cutters. They are designed to be mounted and removed without the use of a tool. This reduces the time needed to replace cutters.

Item Dia. of
Cut Cutting
Depth 3080-2016 11/16" 1" 3080-2018 13/16" 1" 3080-2019 7/8" 1" 3080-2020 15/16" 1" 3080-2021 1" 1" 3080-2022 1-1/16" 1" 3081-2016 11/16" 2" 3081-2018 13/16" 2" 3081-2019 7/8" 2" 3081-2020 15/16" 2" 3081-2021 1" 2" 3081-2022 1-1/16" 2"

 

Size of Pilot Pins (sold separately):

Cutter diameter 11/16" is with 3/4" one-touch shank, Hole of pilot pin = Dia. 1/4"
Cutter diameter 13/16" to 1-1/16" are with 3/4" one-touch shank, Hole of pilot pin = Dia. 5/16"