Cantek Automatic Edgebander | MX350MR

Overview

The Cantek MX350MR Automatic Edgebander is an entry-level edgebander with pre-milling that blends quality edge-banding results with affordability for small to mid-size shops. Diamond pre-milling cutterheads machine the panel edge before glue application, while a dual-purpose end trim system handles both flush and radius trimming from the control panel. The chain-fed design handles edge tape from 0.4mm to 3mm thick, with mechanical digital readouts for quick, repeatable adjustments.

Key Features

• PLC control system with LED display and keypad
• Pre-milling diamond cutterheads machine panels before glue application for optimum edge quality
• Dual-purpose end trim and radius trimming system, activated from the control panel
• Chain-fed workpiece handling for consistent material feeding
• Edge coil support plate: Ø 800 mm (31.5″), for PVC/ABS
• Automatic edge feeding with a thickness capacity of 0.4–3 mm
• Guillotine shears cut coiled edge bands up to 3 mm thick in Hard-PVC/ABS
• 1.2 kg (2.64 lb) Teflon-coated hot-melt glue pot
• Spring-loaded pressure unit with two pressure rollers (1 chrome & 1 rubber)
• Heavy-duty pressure beam with extendable workpiece support
• Heated infeed fence preheats the panel for optimum glue penetration
• Mechanical digital readouts for quick adjustment of working units and thickness
• Available in 230V single-phase or three-phase configurations

Specifications

Feeding speed 23 FPM (7 m/min) Panel thickness 0.472″–1.77″ (12–45 mm) Edge thickness 0.0158″–0.118″ (0.4–3 mm) Minimum panel width 3.54″ (90 mm) Minimum panel length 7.48″ (190 mm) Working table height 33.7″ (856 mm) Extraction connection 3 x 4″ = 1,200 CFM (3 x 100 mm) Air consumption 8.83 CFM (250 liters/min) Premilling spindle speed 9,000 RPM Top & bottom trimmer RPM 10,500 RPM Max. machine dimensions (L x W x H) 126″ x 47¼″ x 47¼″ (3200 x 1200 x 1200 mm) Machine weight 1,162 lbs (528 kg) Shipping dimensions (L x W x H) 111″ x 28.4″ x 52″ (2820 x 720 x 1320 mm) Shipping weight 1,452 lbs (660 kg) Electrical requirements 230V/1PH/60Hz = 35 amps; 230V/3PH/60Hz = 19 amps Total connected power 8 HP (6 kW)