Skip to main content

Canplas 3-Way Mounting Plate - New Construction, Central Vacuum

Sold by Vacuums and More

Sponsored
Canplas 3-Way Mounting Plate - New Construction, Central Vacuum
$6.99

Opens evacuumsandmore.com in a new tab. The seller handles checkout, shipping, and returns.

We may earn a commission when you buy through product links. Sponsored labels identify paid placements from Shopify. We select the Weekly Edit independently. How we make money

Price and availability requested live for this page. Final details are set by the seller.

Share

A closer fit

Find this, but…

Start with this listing, then change what matters. Matches come live from independent Shopify shops and are separate from StorkScout’s Weekly Edit.

Searches start with new, available products that ship to and from the U.S.

What would suit you better?

Try “folds for air travel” or “same shape, without plastic.”

About this product

This three-way mounting plate anchors a central vacuum inlet valve to the wall framing during new construction, going in while the studs sit open and long before drywall enters the picture. Whether the finished inlet ends up flat and square for the life of the house comes down to how well this plate goes in now.

Rough-in is the easiest point in any project to get inlet placement right, precisely because the wall is not closed up yet to hide a mistake. Fastening the plate square and plumb gives the valve a rigid connection, and every loose or misaligned inlet, however small the gap, becomes a leak point that shows up as weaker suction across the system once the wall is finished and the leak itself is out of sight.

This is part 791041W. Follow your inlet valve manufacturer's rough-in height and spacing guidelines, and take the time to true the plate up against the stud before driving fasteners, since correcting it after drywall is a much bigger job.

Because this plate goes in before the trunk-line tubing is finalized, it is worth dry-fitting the pipe run up to the plate location before permanently fastening either one. That lets you confirm the tubing lines up cleanly with the plate's opening instead of discovering a misalignment after the drywall has already gone up around it. Leave a little slack in the tubing run near the plate rather than cementing it drum-tight, since framing can shift slightly as a house settles and a rigid connection right at the plate is more likely to crack than one with a small amount of give built in.

  • Part: 791041W
  • Use: new construction, installed at rough-in before drywall
  • Function: anchors the inlet valve flush and square to the framing
  • Note: confirm rough-in height and spacing with your inlet valve's installation guidelines

Description supplied by Vacuums and More through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.

Keep exploring

Related current listings to open on StorkScout and compare before visiting a seller.