About this product
📘 Overview
Bobcat coupler lever kit — the right-hand bobcat coupler replacement for OEM part 6724775G — the lever assembly that drives the wedge pin locking an attachment into the Bob-Tach coupler. The kit arrives complete with all eleven components, including the right-hand lever, wedge pin, trunnion, pivot handle, both springs and the full fastener set, so a worn or seized coupler is rebuilt in one order rather than assembled from loose parts. This is the right-hand side only; the left-hand side is a separate kit. As a bobcat quick coupler replacement it rebuilds the bob-tach lever kit mechanism in place.
⚙ What Is in the Bobcat Coupler Lever Kit?
- Complete eleven-piece rebuild kit — right-hand lever, wedge pin, trunnion, pivot handle, roll pin, two springs, socket head bolt, hex bolt, nut and washer
- Rebuilds the wedge engagement mechanism, the part of the Bob-Tach system that actually carries attachment load — a worn bobcat wedge pin is what lets a bucket move under load, not the visible handle
- Every component interchanges with the Bobcat original, so the kit installs into the existing coupler casting with no drilling or modification
- Ships as a standard parcel rather than freight, so a coupler rebuild does not wait on an LTL delivery window
🔑 Why Rebuild Rather Than Replace the Coupler
- A worn wedge pin is the usual cause of an attachment that will not lock — replacing the lever kit is a fraction of the cost of a complete coupler plate
- One kit does the whole right side — no chasing individual springs and roll pins across separate part numbers while the machine sits idle
- Restores the original clamping force, which is what keeps a bucket seated under load; a slack wedge is a safety issue, not a nuisance
📊 Bobcat Coupler Lever Kit Specifications
Specification Value OEM part number 6724775G Depco part number D6724775G Part type Right-hand skid steer coupler lever kit Side Right hand Series G-Series System Bob-Tach attachment coupler — bobcat coupler rebuild Kit contents 11 pieces — lever, wedge pin, trunnion, pivot handle, roll pin, 2 springs, socket head bolt, bolt, nut, washer Shipping method Standard parcel carrier🚜 Which Bobcat Loaders Take the 6724775G Lever Kit?
This is a machine-specific coupler component, not a universal fitment. It replaces the right-hand lever assembly in the Bob-Tach coupler on the Bobcat models published by Depco below:
Machine group Models Bobcat skid steer loaders A770, S510, S530, S550, S570, S590, S630, S650, S750, S770, S850 Bobcat compact track loaders T450, T550, T590, T630, T650, T750, T770, T870Confirm the side you need before ordering — this kit is the right-hand assembly, and the left-hand side uses a different part number. Check your existing lever against OEM 6724775G, and if your model is not on the list above, email support@eskidsteer.com or message us on chat and we will confirm the coupler generation before you buy. Everything needed to confirm fitment is on this page — add it to your cart to check delivered pricing for your address.
🔗 Parts Often Bought With the 6724775G Part
Related stock on eskidsteer.com — each shares a side, a kit, or a machine list with this part:
Part OEM number Why it is listed here Bobcat Coupler Lever Kit - G Series - Left Hand OEM 6724776G the opposite-hand part Bobcat Coupler Lever Kit - M Series - Left Hand OEM 6724776M the opposite-hand part Bobcat M Series Front Windshield Glass OEM 7120401 fits the same machines Bobcat M Series Side Lower Left/Right Glass Window for Skid Steer Loaders OEM 7261608 fits the same machines❓ Bobcat Coupler Lever Kit Questions, Answered
Is this kit an exact replacement for Bobcat OEM 6724775G?
Yes. The Depco D6724775G kit interchanges directly with Bobcat 6724775G and installs into the existing Bob-Tach coupler casting without modification.
Does the Bobcat coupler lever kit cover both sides of the coupler?
No. This kit is the right-hand side only. The left-hand lever assembly is a separate part number and is sold as its own kit.
What parts come in the Bobcat lever kit?
The kit contains eleven pieces: the right-hand lever, wedge pin, trunnion, pivot handle, roll pin, two springs, a socket head bolt, a hex bolt, a nut and a washer. No additional hardware is needed.
Why will my attachment not lock into the Bob-Tach coupler?
A worn or seized wedge pin is the most common cause. The wedge is what carries attachment load, and once it rounds off, the lever will move without clamping. This kit replaces the wedge and the entire lever mechanism driving it.
How does the Bobcat lever kit ship?
The kit ships via standard parcel carrier. Shipping is calculated at checkout once you enter your delivery address.
How do I know whether I need the right-hand or left-hand lever kit?
Face the coupler from the front of the machine as an attachment would sit. The lever on your right is the right-hand side, which is OEM 6724775G. Most rebuilds replace both sides at once because the two wear at the same rate.
Description supplied by eSkidSteer through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.
