About this product
Bobcat G-Series Pro-Series Cab Enclosure
Close in an open Bobcat G-Series loader with a 1/2-inch Lexan polycarbonate front door, locking hardware, weather seals, and the mounting parts needed for a complete retrofit. This kit gives working machines a hard front barrier against wind, precipitation, brush, and jobsite debris without requiring an intact factory door system.
Two choices matter before you order: the loader's bucket-cylinder layout and the amount of cab coverage. Select one center bucket cylinder or two side bucket cylinders, then choose Door Only or Door + Side Windows. Those options determine the geometry and parts SSC ships.
Confirm the G-Series cab layout
Supported G-Series records include the Bobcat 763; S150, S160, S175, S180, S200, S220, S250, S300, and S320 skid steers; T110, T140, T180, T190, T200, T250, T300, and T320 compact track loaders; and A300 and A320 all-wheel steer loaders.
Older Bobcat naming and cab changes can make model-only ordering unreliable. SSC has also supplied this product for a 773G after photo confirmation. If your plate reads 753 or 773, or if the model is not in the list above, do not guess from the product photos. Send the model plate, front cab opening, hinges, and loader-arm area through our contact page so SSC can match the cylinder layout and cab shape.
Door Only or Door + Side Windows
The Door Only Kit contains the formed front door and its installation package. Door + Side Windows adds matching stationary polycarbonate side panels with seals and mounting hardware. The side windows do not slide. Neither configuration includes a roof panel or rear window.
- Formed 1/2-inch Lexan polycarbonate front door.
- Locking exterior handle and keys, interior pull, hinges, latch, striker, seals, thresholds, fasteners, and related hardware.
- Stationary side panels when the Door + Side Windows option is selected.
Compare the other Bobcat enclosure systems if the machine is C/F-, M-, or R-Series rather than G-Series.
Installation and warranty
Most G-Series installations use the factory hinge location, but the supplied striker still mounts to the ROPS and some machines require drilling or tapping. Remove abandoned hardware, square the door in the opening, and set the latch alignment before final tightening. The Pro-Series installation guide covers the general preparation and adjustment sequence.
The front polycarbonate door carries SSC's limited lifetime breakage warranty for the original owner during normal, non-abusive use. Hardware and optional equipment carry three months of coverage, subject to the published exclusions and return terms.
Frequently asked questions
Why does the bucket-cylinder count matter?
The one-center-cylinder and two-side-cylinder machines use different cab geometry. Match the option to the loader in front of you.
Will this replace an existing Bobcat factory door?
This is a full aftermarket retrofit for an open cab. Contact SSC first when factory door hardware, wiring, sensors, or a factory frame remains on the machine.
Are the side windows removable?
They are stationary panels, but they can be unbolted when seasonal operation calls for an open cab.
Description supplied by SkidSteerCabs.com through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.
