About this product
SPECIAL NOTES
Prior to installation, verify all hardware and properly tighten and spring preload is set to 5-10mm(1/4-3/8in). Our technical department is available to answer any other questions.
*Requires welding factory spindles onto the lower front brackets. Make sure your E34 has 61MM Front Axle Clamp DAMPING LEVELS 16 Levels HEIGHT ADJUSTMENT Yes SPRING RATE(FRONT) 8 kg/mm SPRING RATE(REAR) 6 kg/mm SPRING LENGTH(FRONT) 180 mm SPRING LENGTH(REAR) 200 mm CAMBER PLATE(FRONT) Yes, With Pillow Ball CAMBER PLATE(REAR) No SPRING INNER DIAMETER(FRONT) 62 mm (2.44 inch) SPRING INNER DIAMETER(REAR) 62 mm (2.44 inch)
*Requires welding factory spindles onto the lower front brackets. Make sure your E34 has 61MM Front Axle Clamp DAMPING LEVELS 16 Levels HEIGHT ADJUSTMENT Yes SPRING RATE(FRONT) 8 kg/mm SPRING RATE(REAR) 6 kg/mm SPRING LENGTH(FRONT) 180 mm SPRING LENGTH(REAR) 200 mm CAMBER PLATE(FRONT) Yes, With Pillow Ball CAMBER PLATE(REAR) No SPRING INNER DIAMETER(FRONT) 62 mm (2.44 inch) SPRING INNER DIAMETER(REAR) 62 mm (2.44 inch)
Description supplied by Mafia Motorsports through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.
