Binks DVX Gravity Feed Manual Spray Gun

DVX Gravity Feed Manual Spray Gun

Next level design to maximize next level performance. The new standard in spray guns is here

Manufacturer: Binks

Part Number: DVXG-XX-XX

Description: The new DVX series revolutionizes air spray guns for the industrial market. The innovative redesign of the fluid body and air caps allows us to mitigate turbulence that occurs between the paint and air when the trigger is pulled. More efficient air flow paths reduce separation and stagnation zones. The result is higher flow rates for faster application, higher transfer efficiency to reduce material use, the most consistent pattern on the market, and the best spray finish quality ever.

Best Air Spray Finish Quality

• Turbulence Control maximizes flow rate efficiency and precision
• Reduces orange peel and mottling
  
• The most consistent pattern on the market

Faster Application

• Large, consistent pattern for fewer passes
  
• The air cap orientation lock allows for more spray time
• Easy to install, clean, maintain, and repair
  
• Fewer parts and part numbers

Higher Transfer Effciency

• Reduces material use compared to other non-electrostatic spray applications
  
• Works at both low and high inlet air pressures
  
• Sprays at 2 bar, reducing air consumption
• Features HVLP PLUS aircaps, capable of handling a range of materials across three pressure air caps and two gravity air caps

DVX Manual Air Spray Guns are designed to provide improved balance and ergonomics, with high-flow rate capabilities to keep up with any painter.

Specifications:

• Quick release air cap with orientation lock for fast and easy aircap selection, fitting and removal with orientation lock. Less time setting up & more consistent spraying.
• The air inlet and the air-adjusting valve are reconfigured into a single “co-axial” component and placed in an ergonomic location for increased air control precision sensitivity.
• The innovative trigger design removes sideways and rotary play from the trigger action, while maintaining a comfortable fit and feel.
• Smoother surfaces, reduced contours and fewer features on the gun body makes cleaning quicker and easier.
• Improved wetted fluid sections have been redesigned to help reduce paint build up and improve material flushing.

Parts and Accessories:

Ref. No. Part No. Description 1 SEE TABLE 1 AIR CAP & RETAINING RING 2 DVXK-400 RETAINING RING SUB ASSEMBLY 3 - AIR CAP 4 SEE TABLE 2 FLUID NOZZLE 5 + DVXK-401 SPRAY HEAD KIT 6 DVXK-402 INDEXING BAFFLE PLATE 7 # 704403 SCREW (KIT OF 3)  8 - SPRAYHEAD  9 704401 GASKET (KIT OF 2) 10 + DVXK-403  FAN CONTROL VALVE 11 - VALVE BODY 12 # - O RING 13 DVXK-404 SPREADER KNOB KIT 14 - SPREADER VALVE ADJUSTING KNOB 15 + DVXK-405 AIR VALVE ASSEMBLY 16 - FRONT CAGE ASSEMBLY 17 - AIR VALVE STEM 18 # - AIR VALVE SPRING 19 - REAR SEAL ASSEMBLY 20 SEE TABLE 2 FLUID NEEDLE 21 # 704405 NEEDLE SPRING 22 DVXK-406 FLUID ADJUSTING KNOB 23 704406 TRIGGER, STUD, SPRING & SCREW KIT 24 # - TRIGGER SCREW 25 # - SPRING 26 # - TRIGGER STUD 27 - TRIGGER 28 704417 INLINE FLOW VALVE 29 + 702731 PACKING, SPRING & PACKING NUT KIT 30 704429 TOOL KIT 31 - TIP WRENCH 32 - TORX DRIVER  33 - VALVE TOOL 34 GFC-515 GRAVITY CUP


# DVXK-408 MINOR SERVICE KIT INCLUDES ITEMS MARKED # + DVXK-409 MAJOR SERVICE KIT INCLUDES ITEMS MARKED +

 

Table 1 - DVXG AIR CAP PERFORMANCE GUIDE

Part No. Air Cap & Type Air Inlet Pressure Air Cons. Fan Pattern DVXG-130-G1-K G1 HVLP PLUS 29 psi 11.1 scfm 11.8 in DVXG-130-G2-K G2 HVLP PLUS 29 psi 12.0 scfm 13.0 in

 

Table 2 - DVXG AIR CAP- FLUID NOZZLE- NEEDLE COMBINATIONS

Air Cap Fluid Nozzle

Needle
Part No. Nozzle Size Marking Part No. Marking G1 DVXG-235-11-K 1.1 DVXG-1.1 DVXG-335-K DVXG-335 G1 DVXG-235-12-K 1.2 DVXG-1.2 DVXG-335-K DVXG-335 G1 DVXG-235-13-K 1.3 DVXG-1.3 DVXG-335-K DVXG-335 G1 DVXG-235-14-K 1.4 DVXG-1.4 DVXG-335-K DVXG-335 G1 DVXG-235-15-K 1.5 DVXG-1.5 DVXG-335-K DVXG-335





G2 DVXG-236-16-K 1.6 DVXG-1.6 DVXG-336-K DVXG-336 G2 DVXG-236-18-K 1.8 DVXG-1.8 DVXG-336-K DVXG-336 G2 DVXG-236-20-K 2.0 DVXG-2.0 DVXG-336-K DVXG-336

 

Binks charges a significant fee to drop ship orders of less than $250.00. Therefore, any parts orders under $250.00 will be added to our stocking orders and then reshipped to you. If you need these products faster you can contact us for an expedited drop shipping fee.

Contact: 503-545-3176