Baumalight Rotary Brush Cutter CF360 For Skid Steers

The Baumalight CF360 Rotary Brush Cutter brings a 60-inch cutting width to skid steer vegetation management, giving property owners and contractors a practical way to reclaim overgrown ground with a compatible carrier. Its 2-blade rotor works through grass, brush, and woody growth, while the 70-inch cutting path defines the attachment's overall working envelope. Front and rear chain curtains help reduce the discharge of cut material while keeping the deck suited to regular brush maintenance.

Choose the M450, M550, or M650 roller-vane motor to match the skid steer’s auxiliary hydraulic flow, rather than treating every carrier as the same setup. Baumalight publishes a 2-inch maximum felling capacity for this model, with actual performance determined by motor selection, available flow, working pressure, and material conditions. Reversible 1/4-inch AR400 slasher blades provide a durable cutting surface and can be serviced as their edges wear.

A 1/4-inch steel deck provides a solid base for repeated clearing passes. The driveline uses a hydraulic relief valve set at 3,000 PSI, while a heavy-duty output shaft shield helps protect vulnerable components from brush and debris. Hose Armour wraps protect the hydraulic lines in the working area. Powder-coated surfaces and anti-slip footing support practical outdoor use, and a replacement blade set is included with a new cutter.

Match the 1,342-lb attachment to Baumalight's 4,000–8,000 lb carrier range and confirm lift capacity, hydraulic output, and overall machine stability before ordering. The M450 does not need a case drain, while Baumalight recommends one for the M550 and M650. Standard couplers are included with the M450 and M550 configurations; the M650 requires separately supplied couplers. Keep the cutting deck at the correct working height, inspect blades and connections regularly, and follow the operator's manual for setup and field operation.