Baileigh BP-17913CNC; 220V 3Phase 179Ton, 156" 2Axis Programmable Hydraulic Press Brake Distance Between Housings is 124" 1000789

This large press brake lets you slide 10-foot sheets between the housings. The rigid steel frame and hydraulic parts by Nachi® and Vickers/Eaton® keep this heavy-duty press brake running reliably.

Features:

• Delivers 179 tons of pressure.

• Offers 13-foot length (157”) and 123” of distance between the housings.

• This heavy-duty press brake is also available in a 10-foot version.

• Runs on 220-volt 3-phase power.

• Industrial-grade hydraulic system with Vickers/Eaton® and Nachi® components will last for many years at peak capacity.

• Torque tube connects the 2 hydraulic cylinders, so they stay synchronized and parallel to the bending table at all times.

• Chain drive linkage keeps hydraulic cylinders in time with each other, so the machine stays balanced and lasts longer.

• Hydraulic cylinders are near the back of the machine for convenient fluid changes.

   

ACCURATE, USER-FRIENDLY CONTROL SYSTEM

• Runs in single-bend mode or programmable mode.

• Comes standard with 2 axes of control: stroke and back gauge distance.

• Controller is so simple that you could train someone to use it in 5 minutes.

• Programmer stores up to 40 programs with up to 25 bends per program, great for saving time on production.

• Bending is accurate to +/- .01mm, ensuring that parts come out right the first time.

• Main electrical components made in Germany by Weidmueller and Schneider® will give you years of trouble-free productivity.

• Foot pedal brings the stroke up and down. Just input your specs on the controller, then press the pedal for each bend.

• You can make a complete part without touching the controller. Push the metal in while pressing the foot pedal.

• Choose between 2 speeds: a rapid approach and retract and a slow bending speed.

• Speed option lets you reduce cycle time and make your shop more efficient.

• Chain drive back gauge system uses tried-and-true technology that you can maintain easily.

• The 23.62" back gauge can advance or retract according to programmed instructions.

   

STEEL PLATE CONSTRUCTION AND INCLUDED TOOLING

• Fully-welded all-steel construction helps prevent deformation and minimize flex during the bending process.

• Weighs a whopping 24,640 lbs. for massive structural strength that ensures accurate results.

• Includes support arms around 2 feet in length.

• Comes standard with tooling: a multi-Vee bottom die and gooseneck punches (European Style).

• Quick-release tool holders let you make changes easily. Just open a lever and it drops the top die out. No time-consuming cap screws!

• Crowning adjustment dial gives you the option to deliver more pressure in the center of a bend for consistency all the way across.

• CNKELI® safety light curtains prevent the machine from bending when someone is too close.

• Light curtains will swing open and get out of the way when you’re doing a tool change.

Specifications:

• Item Number: BP-17913CNC
• Table Length: 125/157"
• Back Gauge Length: 17144
• Maximum Pressure: 170 tons
• Throat Depth: 12.5"
• Stroke Distance: 7"
• Approach Speed: 2.0" / sec.
• Back Gauge Motor: 1/2 hp
• Bending Speed: .236" / sec
• Main Motor: 15 hp
• Distance Between Housings: 100/123"
• Distance From Table To Ram: 17.7"
• Power: 220V / 3-phase
• Shipping Dimensions (10 Ft): 134" x 64" x 103"
• Shipping Dimensions (13 Ft): 166" x 64" x 103"
• Shipping Weight (10 Ft): 21,280 lbs.
• Shipping Weight (13 Ft): 24,640 lbs.
• Shipping Weight: 24640lbs
• Shipping Dimensions (Inches): 181x71x110