Audio-Technica PRO35 Condenser Microphone

Audio-Technica PRO35 Condenser Microphone
Cardioid Condenser Clip-on Instrument Microphone

Designed for sax, toms, brass, and percussion, the PRO 35 excels in high-SPL applications and is ideal for active stage performances. Its extended frequency response captures subtle nuances of the performance. The included AT8418 UniMount® clip permits accurate positioning and provides shock resistance while protecting the element. The microphone’s cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source.

Features

• UniMount® clip permits accurate positioning, provides shock resistance and protects element
• Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
• Extended frequency response captures subtle nuances of the performance
• 6' (1.8 m) cable permanently attached to microphone

Specifications

Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 50-15,000 Hz
Low Frequency Roll Off: 80 Hz, 18 dB/octave
Open Circuit Sensitivity: -45 dB (5.6 mV) re 1V at 1 Pa
Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: 115 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio: 64 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 11-52V DC, 2 mA typical
Switches: Flat, roll-off
Weight (Microphone): 0.3 oz (8 g)
Weight (Power Module): 2.9 oz (81 g)
Cable: 6.0' (1.8 m) long (permanently attached to microphone), 0.10" (2.6 mm) diameter, 2-conductor, shielded cable with TA3F-type connector
Dimensions (Power Module): 3.66" (92.9 mm) long, 0.74" (18.9 mm) diameter
Dimensions (Microphone): 0.98" (25.0 mm) long, 0.40" (10.2 mm) diameter
Output Connector (Power Module): Integral 3-pin XLRM-type
Accessories Included: AT8418 UniMount® microphone instrument mount; AT8538 power module; soft protective pouch
Audio-Technica Case Style: M12