About this product
Akemi Stone Sealer Matte Finish
AKEMI® Stone Sealer matt finish is a professional, solvent-containing sealer made from superior acrylic resins. It penetrates porous and absorbent stone to seal the surface, deliver a good colour intensification, and make the stone noticeably easier to clean — all while keeping a natural, non-glossy matt look. The cured film is weather-resistant and non-yellowing, making it a reliable interior sealer for marble, granite, slate, sandstone, quartzite, terrazzo, and fair-faced concrete.
- Matt, natural finish — seals without adding gloss
- Colour intensification — enriches the stone’s natural tone
- Easier to clean — reduces absorbency of porous stone
- Non-yellowing — superior acrylic resin base
- Fast drying — ready in as little as 10 minutes
This product is offered in the following options — select your choice above:
Size Item Reference 1 L CARE.10840 5 L CARE.10841- Solvent-based sealer made from superior acrylic resins
- Weather-resistant and non-yellowing
- Gives treated surfaces a good colour intensification
- Makes porous, absorbent stone easier to clean
- Matt finish preserves the natural, non-glossy look of the stone
- Fast drying — surface dries in 10 to 60 minutes depending on temperature
Recommended to seal porous and absorbent natural and artificial stone:
- Marble, granite, slate and slabs from Solnhofen
- Sandstone and quartzite
- Terrazzo and fair-faced concrete
Not suitable for: polished, fine-ground, glazed or damp surfaces; and burnt products such as cotto, clinker or stoneware. Outdoor durability is limited — AKEMI® recommends AKEMI® Colour Intensifier for exterior use instead.
- Clean the surface — it must be clean, completely dry, and free from all layers. Use the appropriate AKEMI® cleaner for the soiling, then rinse well with water. Allow the stone to dry completely (as a rule at least 1–2 days).
- Apply undiluted and evenly in a thin layer with a brush, paint roller, or spraying device. Avoid direct sunlight and humidity until dry.
- Allow the surface to dry for approximately 10 to 60 minutes, according to temperature.
- For very absorbent surfaces, apply a second time.
- Clean tools with AKEMI® Nitro-Dilution.
- For regular cleaning, AKEMI® Mild Stone Soap has shown the best results.
- Do not use on polished, fine-ground, glazed, or damp surfaces, nor on burnt products (cotto, clinker, stoneware).
- Protect objects in the working area that are sensitive to solvents (various synthetic materials, rubber, lacquered parts).
- Films of the sealer can be removed with AKEMI® Universal Dilution.
- Use a liquid-glove hand protector; empty the container completely for proper disposal.
- Industrial chemical product — use only in well-ventilated areas and wear chemical-resistant gloves and eye protection. Always consult the AKEMI Safety Data Sheet (SDS) before use.
Industrial chemical product. Use only in well-ventilated areas. Wear chemical-resistant gloves and eye protection. Consult the AKEMI Safety Data Sheet (available from the manufacturer or stein.akemi.de) before use. Technical values are manufacturer figures and may vary with jobsite conditions.
Description supplied by Dynamic Stone Tools through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.
