AGP Upper Hard Pipe (UHP) w/ Blow Off Valve Flange, 03-05 Neon SRT-4

This kit completely replaces the stock intercooler to throttle body stock rubber hose with aluminum 2.5 inch mandrel bent tubing.

Comes with your choice of 1) No Blow off Valve flange, 2) Hks flange, 3) TurboXs flange, or 4) Greddy flange. Includes 4 ply silicone hose connectors, all hose necessary hose clamps, and one HUGE improvement over stock piping: a new temperature sensor that threads into the UHP. Please note, this is a blow off valve pipe, with your choice of BOV flange, but it does not include a blow off valve, please see our other listing that includes the blow off valve and this same pipe if you want a complete kit.

This upper hard pipe, or cold side pipe comes with the threaded temp sensor. There is no need to purchase an additional sensor. This version 2 sensor kit uses an OEM sensor so you will no longer need to hardwire in the temp sensor. This temp sensor is threaded, and will not blow out like the OEM push/grommet sensor.

TIP Sensor information. The TIP Sensor uses that red vacuum line that you pulled out of the stock plastic pipe. We designed this pipe with an 1/8" NPT threaded bung for use of the factory red line. The pipe will have an 1/8" NPT plug installed so if you want to utilize the "red line", you will need to pull out the plug and install an 1/8"NPT pipe fitting.

Lastly, if you don't already have one, you'll need to install a blow of valve block off plate.

 We offer this piece with or without a block off plate.

Note: This Upper Hard Pipe will NOT work with the OEM Air Box or the AEM Short Ram Intake. Fits all 2003-2005 Dodge Neon SRT-4's. 

NOTE: Its very important you choose the correct flange you need in the pull down menu. The no flange option is for those of you not installing a blow off valve and just want a replacement aluminum pipe with threaded temp sensor. Greddy flange is for those of you installing a Greddy blow off valve. TurboXS is for those of you installing a TurboXS blow off valve and HKS flange is for those of you installing a HKS blow off valve. We are now offering a TIAL flange option for those wanting to run a Tial blow off valve. You must choose the right flange option or else this piping will not work for you.