AE86 to JZ Motor Mount Brackets

Our all new steel mount brackets for JZ engines are designed to take a lot of abuse and hold up over time. If you want a JZ in your Corolla, this is how it's done!

Fitment

If you're doing a 1J or 2J, these brackets are the ones to use. Later model single turbo 1J's will require the turbo oil drain to be bent forward just a bit to clear the bracket for proper placement on the forward most mounting position that is just slightly higher then the next position just back a spot. while the brackets have slotting allowing about 1" of adjustment, transmission adapters and transmission cross members will typically dictate the motor position, these brackets allow for the use of transmissions ranging from Nissan to GM and of course Toyota.

Material and construction

CNC cut from 1/4" steel plate, formed and plated, these engine brackets will handle all the punishment you can throw at them and last a life time doing it. We use a single piece of steel plate that's formed into shape to eliminate welds in transition areas from one plane to another, then we add a gusset for a bit strength. Our design allows for great access to the bolts without a compromise in strength or the potential for cracked welds over time. Our goal isn't one or two years of service, but a lifetime.

Rubber Mounts

While the brackets are designed to fit on stock rubber mounts, due to the weight of the JZ, it's highly recommended to use our urethane AE86 mounts.

 

These mounts do not fit the TE Chassis.

 

Kit includes

1 pair of formed brackets

Block bolting hardware