Adam's Fabric Protector

Adam’s Fabric Protector was designed to allow for easier clean-up and stain prevention from everyday spills such as coffee, soda, food, snow and other liquids that might wind up in your vehicle. It’s suitable for a myriad of textiles and fabric styles ranging from convertible tops, cloth seats, Alcantara, suede, carpets, floor mats, and even furniture.

• Ready to Use, Solvent-Based Formula
• Rapid Cure – Fast Flash & VOC Exempt
• Provides Extreme Hydrophobicity to Absorbent Surfaces
• Suitable for a Variety of Fabrics and Textiles
• Durable Fluoro-Silicone Resin Lasts 1-3 Months

Adam’s Fabric Protectant is a nano coating that is comprised of a penetrating, reactive fluoro-silicone resin that adheres to textile fibers and produces strong water and oil repellency, stain resistance and liquid removal performance without changing the look and feel. This solvent-based formulation quickly dries in as little as an hour and produces an effect that can last for 1-3 months depending on abrasion.

Instructions for General Use:

1. Ensure fabric to be protected is clean and dry before application.
2. In a back and forth motion, with overlap, saturate the surface ensuring even coverage.
3. Once sufficiently covered, allow area to air dry for at least one hour but several hours is best.
4. Avoid spraying onto unintended surfaces that are non-fabric.

Instructions for Carpeting/Floor Mats:

1. Ensure carpeting or floor mat is clean and dry before application.
2. Using an Adam’s Cockpit Brush, comb the fibers in a single direction.
3. In a back and forth motion, with overlap, saturate the carpet ensuring even coverage.
4. Once sufficiently covered, allow area to air dry for at least one hour but several hours is best.
5. Repeat Steps 2-4 but comb the fibers in another direction. Repeat this until the carpeting has been protected from each of the cardinal directions (i.e. North, South, East and West).
6. Avoid spraying onto unintended surfaces that are non-fabric.

When Cleaning a Spill:
To preserve the life of the coating and promote maximum durability, blot out spills with a clean, dry microfiber towel and avoid rubbing the liquid into the surface.

View Adam's Polishes SDS