About this product
Action Clutch Stage 3 Clutch Kit (1MS) | 2009-2019 Honda Fit (ACR-0703)
Action Clutch part number ACR-0703 is a performance clutch kit for the 2009–2019 Honda Fit (L15A7).
Vehicle fitment
Manufacturer's vehicle list
- 2009–2019 Honda Fit (L15A7)
As written in the product title
Vehicle 2009-2019 Honda Fit Make Honda Years 2009–2019Where the two differ, go by the manufacturer's list.
Engine, trim, drivetrain and options can change which part fits, so contact mobileiGo with your VIN if you are unsure.
Specifications
Brand Action Clutch Manufacturer part number ACR-0703 Category Clutch Kits, Flywheels & Accessories Type Performance upgrade Shipping weight 15.0 lbBefore you buy: clutch or flywheel part tips
- Lightweight flywheels let the engine rev faster but can make launches and low-speed driving less smooth.
- Resurface or replace the flywheel when installing a new clutch.
Frequently asked questions
Will the Action Clutch ACR-0703 fit my Honda?
It is listed for the 2009–2019 Honda Fit (L15A7). Check your engine, trim and options against the fitment table above before ordering.
What is the part number?
The manufacturer part number is ACR-0703.
What torque is this clutch rated for?
The torque rating is listed in the specifications or manufacturer description when the maker publishes it. Choose a rating above your engine's output.
Is this part new?
Yes. It is a new part sourced from an authorized distributor.
Manufacturer description
Stage 3 Clutch Kit (1MS) for 2009-2019 Honda Fit by Action Clutch
The 1MS Stage 3 Kit uses an extremely durable, High Performance MIBA Sprung Ceramic Disc. This kit features a single diaphragm heavy-duty pressure plate with reinforced drive straps for increased durability. It is available in a 4 and 6 MIBA Ceramic puck configuration with the 4 puck being the more aggressive of the two. This MIBA Sprung Ceramic kit is engineered for low/mild horsepower vehicles. The Stage 3 MIBA Sprung Ceramic kit creates quick engagement as well as clutch chatter, which should be minimal once proper break-in is completed. Like all of Action Clutch's sprung kits, the Stage 3 kit features fully enclosed spring retainers to help protect your investment from any springs popping out which can cause catastrophic damage to your transmission or engine as seen with competitors.
Features
- Clutch Covers Feature Ductile Iron Friction plate
- Reinforced heavy duty drive straps
- 4 stage Heat treated diaphragm spring
- Estimated Torque Holding Capacity: 220ft-lbs
Benefits
- MIBA Friction Ceramic Material Pads
- Full Enclosed Spring Retainers
- Sprung Hub For Easy Engagement
Break-In Requirements: 500 street miles / Keep RPM’s under 4500, no more than half-throttle, no boost (if applicable). Proper break-in is required in order to retain product warranty, ensure longevity and holding capacity.
Important: Image is for reference only; actual product may vary. Please refer to "What's In The Box?" for more information
Applications
- 2009-2019 Honda Fit (L15A7)
What's In The Box?
- 1 - (1MS) Stage 3 Clutch Disc
- 1 - Single Diaphragm HD Pressure Plate
- 1 - Release Bearing
- 1 - Pilot Bearing / Bushing (when applicable)
- 1 - Clutch Alignment Tool
- 1 - Information Sheet
Warranty
- Limited Manufacturers Warranty
Description supplied by mobileiGo.com through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.