About this product
Action Clutch Ironman Sprung (Street) Clutch Kit | 1998-2017 Subaru Impreza (ACR-1801-SPR)
The Action Clutch ACR-1801-SPR is a performance clutch kit for the 1998–2017 Subaru Impreza (FB20D/EJ253).
Vehicle fitment
Manufacturer's vehicle list
- 1998–2017 Subaru Impreza (FB20D/EJ253)
As written in the product title
Vehicle 1998-2017 Subaru Impreza Make Subaru Years 1998–2017Where the two differ, go by the manufacturer's list.
Engine, trim, drivetrain and options can change which part fits, so contact mobileiGo with your VIN if you are unsure.
Specifications
Brand Action Clutch Manufacturer part number ACR-1801-SPR Category Clutch Kits, Flywheels & Accessories Type Performance upgrade Shipping weight 15.0 lbBefore you buy: clutch or flywheel part tips
- Choose a clutch rated above your engine's torque output with some headroom, and match the disc type to how you drive: organic discs are smoother on the street, sprung or puck discs hold more.
- Lightweight flywheels let the engine rev faster but can make launches and low-speed driving less smooth.
Frequently asked questions
Will the Action Clutch ACR-1801-SPR fit my Subaru?
It is listed for the 1998–2017 Subaru Impreza (FB20D/EJ253). Check your engine, trim and options against the fitment table above before ordering.
What is the part number?
The manufacturer part number is ACR-1801-SPR.
What torque is this clutch rated for?
The torque rating is listed in the specifications or manufacturer description when the maker publishes it. Choose a rating above your engine's output.
Is this part new?
Yes. It is a new part sourced from an authorized distributor.
Manufacturer description
Ironman Sprung (Street) Clutch Kit for 1998-2017 Subaru Impreza by Action Clutch
The Legendary Ironman kit uses our extremely durable American Sintered Iron friction material. This kit is best suited for those not looking to upgrade to a multi disc kit yet and want to enjoy something affordable with high torque holding capacity. This dual clamp load kit offers nearly double the clamping force which increases the TQ capacity. The Ironman kit offers some slippage on take off, which champs this kit as a GO-TO kit with its repeatability and endurance. Be sure to learn how to slip a clutch before doing so, not knowing can result in overheating and burning the clutch. Engineered for dedicated high powered race vehicles, the clutch engagement for the ironman is aggressive with an on/off feel and is available in a sprung and unsprung hub. This kit will not introduce clutch chatter, but will have light engagement noise and some gear rattle. This kit is not recommended for daily use and is recommended for race applications only.
Features
- Clutch Covers Feature Ductile Iron Friction plate
- Reinforced heavy duty drive straps
- 4 stage Heat treated diaphragm spring
- Estimated Torque Holding Capacity: 420ft-lbs
Benefits
- Sintered Iron Friction Material
- Rigid or Sprung Hub Type
- High Grade Rivets
Break-In Requirements: 500 street miles / Keep RPM’s under 4500, no more than half-throttle, no boost (if applicable). Proper break-in is required in order to retain product warranty, ensure longevity and holding capacity.
Important: Image is for reference only; actual product may vary. Please refer to "What's In The Box?" for more information
Applications
- 1998-2017 Subaru Impreza (FB20D/EJ253)
What's In The Box?
- 1 - Ironman Clutch Disc
- 1 - Dual HD Pressure Plate
- 1 - Release Bearing
- 1 - Pilot Bearing / Bushing (when applicable)
- 1 - Clutch Alignment Tool
- 1 - Information Sheet
Warranty
- Limited Manufacturers Warranty
Description supplied by mobileiGo.com through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.
