About this product
Aardwolf Vacuum Lifter (AVGLP)
The Aardwolf AVGLP2-200 Vacuum Glass Lifter is a vacuum lifter for handling smooth, non-porous material. It is rated at 441 lb (200 kg), a 2 x 12" (300 mm) circular pad. Power/actuation: 72 PSI (5 bar). Unit weight 141 lb (64 kg).
Features
- 441 lb (200 kg) lifting capacity
- 2 x 12" (300 mm) circular
- Runs on 72 PSI (5 bar)
- 6.4 CFM (180 L/min) air consumption
- Pneumatic 0-90 deg tilt
- Stainless steel vacuum tank, audio/visual alarm
- Weighs 141 lb (64 kg)
Specifications
Property
Detail
Brand
Aardwolf
Lifting Capacity
441 lb (200 kg)
Vacuum Pads
2 x 12" (300 mm) circular
Weight
141 lb (64 kg)
Air Pressure
72 PSI (5 bar)
Air Consumption
6.4 CFM (180 L/min)
Tilting
Pneumatic 0-90 deg
Safety
Stainless steel vacuum tank, audio/visual alarm
Country of Origin
Vietnam
How to Use & Handling
- Inspect the vacuum pad seal for cuts, grit, or compression set before each shift.
- Connect the air/battery supply — 72 PSI (5 bar).
- Seat the pad flat on clean, sound, non-porous material with no chips or seams under the seal.
- Draw vacuum and wait for the gauge to reach the safe zone before taking any load.
- Lift slowly and keep the load low; never stand or pass under a suspended load. Never exceed the rated 441 lb (200 kg).
- Set the material down fully, then release vacuum and vent the pad.
Description supplied by Dynamic Stone Tools through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.
