About this product
Description
If you want to make a beast out of your 68RFE, then this is the valve body for you! It's built like no other to fully maximize the driving experience and capability of your 68RFE Transmission!
Part Number: BM1000
Features
- The valve body is flat sanded to Randys tolerances
- Randy's install Sonnax billet accumulators proven to prevent bore wear and provides unsurpassed sealing qualities
- Sonnax accumulator plate cover with 3 additional bolts eliminating plate blowout
- SSV is reamed out and Transgo switch valves are installed to correct wear and leaks,
- All valve body bores are vacuum tested to ensure hydraulic integrity
- The DNJ billet channel plate is installed onto the valve body and torqued to our specifications preventing cross leaks which results in premature transmission failure,
- Includes solenoid block
Tuning
To unlock the full potential of the Babymaker, transmission tuning is required. If you do not have tuning, this will, at minimum eliminate cross leaks.
Information your tuner will require to properly tune for the BabyMaker:
- Line Pressure set to 225PSI Above 30% Throttle Angle
- 100PSI Resting Pressure
- No Lockup Until 4th Gear
- Low/Reverse Sprag Holdout
- For 2019+ UnderDrive Pulse Test Must Be Turned Off
Description supplied by Dirty Diesel Customs through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.
