Double H Men's Antonio 13" Composite Toe Western Work Boot Brown- DH6134

Double H Antonio 13" Composite Toe Western Work Boot — Light Brown — DH6134

A Men's 13" Wide Square Composite Toe Roper built with the hardworking durability and protection you need every day.

This non-metallic boot is equipped with a composite safety toe, a removable footbed insert and our oil- and slip-resisting Aeroglide outsole for superior traction.

Key Features of the Double H Antonio DH6134

• Composite Safety Toe — Non-metallic cap that meets ASTM standards for compression and impact, with reduced cold transfer.
• 100% Non-Metallic Construction — Composite toe and non-metallic shank; no steel in the boot's structure.
• Electrical Hazard Rated — Tested by an independent lab to withstand 18,000 volts at 60Hz for one minute without leakage.
• Earthquake Rust Leather Upper — Full-grain leather with a 10 row stitch pattern on the 13" shaft.
• Wide Square Toe — Room for the toes to spread inside the composite cap.
• Soft Pig Print Lining — Breathable interior.
• Removable PU Insert — Lifts out for your own orthotic.
• Rubber Midsole and Aeroglide Unit Bottom — Ultra-flexible, oil- and slip-resisting, with outstanding abrasion resistance.
• 1 5/8 Inch Heel — Roper height: stable for walking, still holds a stirrup.

100% Non-Metallic Build

The Antonio pairs a non-metallic composite safety toe with a non-metallic shank — a lightweight combination that meets ASTM standards for impact and compression and carries an EH rating without the weight or cold-transfer of steel.

Aeroglide Outsole

The ultra-flexible Aeroglide outsole is oil- and slip-resistant, built with outstanding abrasion resistance to stay long-wearing on the jobsite or the ranch. Because it is a flexible unit bottom rather than a stiff welted sole, the Antonio needs little break-in underfoot.

Thirteen Inches of Coverage

The 13" shaft runs taller than most work westerns, keeping mud, feed, and debris out and adding support against the shin on uneven ground — with a wide square toe up front so the extra height does not come at the expense of room.

Similar Styles to Consider

• Double H Antonio 13" Square Toe Western Work Boot (DH5134) – the same Antonio silhouette without a safety toe.
• Double H Cleave 12" Composite Toe Waterproof Western Work Boot (DH5422) – a waterproof non-metallic composite-toe pull-on, an inch shorter.

Shop more: Double H Safety Toe, Double H Square Toe, Double H

Frequently Asked Questions

What safety rating does the Antonio DH6134 carry?

A composite safety toe that meets ASTM standards for compression and impact, plus an electrical hazard rating tested to 18,000 volts at 60Hz for one minute without leakage.

Is the Antonio completely non-metallic?

Yes. Both the composite safety toe and the shank are non-metallic, which keeps the boot lighter than a steel-toe western and warmer at the toe in cold weather.

Why choose a composite toe over steel?

Both meet the same ASTM impact and compression thresholds. Composite weighs less and transfers far less cold, which you notice at the toe cap on a winter morning — and on a 13" boot, the weight saving adds up over a shift.

How should a tall pull-on western fit?

Fit at the instep and heel matters more than length on a pull-on, since there are no laces to adjust. A composite cap does not stretch, so size for room across the toes from day one; the wide square last gives the forefoot lateral room. Tall socks help while the 13" shaft softens around the calf.

Does the Antonio need a break-in period?

Less than a welted western. The Aeroglide unit bottom is flexible from the first wear, so the break-in is mostly the leather shaft softening around the calf and instep over the first week or two.

What's the difference between the DH6134 and DH5134 Antonio?

Same 13" wide square roper silhouette — the DH6134 has a non-metallic composite safety toe and EH rating, while the DH5134 is the soft-toe version for jobs that don't require a rated toe.