About this product
With the advancements made over the past several years in turbo chargers, we have developed a great replacement for your tired and worn out IHI turbo. With a great selection of turbo sizes, any daily driver or full race truck can utilize the HSP Single Turbo Kit. These kits are designed to fully replace your factory turbo. We added a more robust and more efficient Borg Warner SXE series turbo in its place. Not only will you gain the advantage of the turbo, but this system includes all mandrel bent 3’’ intercooler tubing, as well as, our proven Cold Air Intake system. Only the best components are selected to be a part of our kits. Track and proven dyno results is what we are after. You can be sure that the results you are looking for can be found with the HSP Single Turbo Install Kit. Power levels will mainly depend on current modifications to your truck but can range from 600HP to 850HP.
*Capable horsepower 600-1000+ depending on turbo, tuning, and fuel system options
INCLUDED COMPONENTS:
- (2) 3”x4” Straight Boots (430-RFAB)
- (1) 2.5”to 3” Reducer Boot (440-RFAB)
- (5) 3” T-Bolt Clamps (422-RFAB)
- (1) 2.5” T-Bolt Clamp (416-RFAB)
- (1) 5/16” Brass Barbed Tee (812-RFAB)
- (1) LB7 Fuel Plug (629-RFAB)
- (24”) 5/16” Fuel Hose (402-RFAB)
- (6) 5/16” Worm Gear Clamp (404-RFAB)
- (3) 10-32 x 3/8" Button Head Screws Zinc
- (2) M4-0.7 x 10mm Socket Cap Screw Zinc
- (4) 1/8” Steel Rivets
- (14.25”) Trim Lock (411-RFAB)
- 22° 4” Boot (432-RFAB)
- (2) 4” T-Bolt Clamps (424-RFAB)
- (1) 4” Filter R0862 (409-RFAB)
- (1) S400 Discharge Clamp (426-RFAB)
- (4) Pedestal Studs (912-RFAB)
- (4) M10 Lock Washers
- (4) M10 Nuts
- (3) M12x1.75x25mm Flange Bolt
- (1) Single Kit Feed Line (450-RFAB)
- (1) Single Kit Drain Line (448-RFAB)
- (1) -4AN to M14x1.5 Feed Line Fitting to Block with Washer (1512-HSP)
- (1) -4AN to 1/4" NPT Feed Line Fitting to Turbo (453-RFAB)
- (1) Drain Fitting to Block (602-RFAB)
- (1) Drain Fitting to Turbo (605-RFAB)
- (1) LB7-LMM Turbo Block Gasket (466-RFAB)
- (2) M8x1.25x20mm Socket Cap Turbo Drain Bolts
- (1) Single Coolant Plug M30 (796-RFAB)
- (1) 12mm Factory Oil Feed Plug (457-RFAB)
- (1) 1/8” NPT Plug
COMPATIBLE WITH:
- LB7: 01-04 VIN Code 1
BENEFITS:
- Increased power
- performance and spool up
- Powder coating option to dress up engine bay
- Upgraded high strength silicone boots
- Many powder coat colors available
- Heat deflection box with air tight seal to prevent hot engine temps from entering filter
Description supplied by Sunny Diesel through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.
